PACKEN / PCN-RADC-GRY

This is a dedicated soft case for the NuRAD wind controller made by Berglund Instruments, a digital wind instrument that can be played using saxophone fingering.

This is a smart case that matches the silhouette of the main body.

◆Designed to match the special shape of NuRAD. By using the core material and stitching appropriately, the back is firm, and the front and bottom have a soft and sharp silhouette, giving it a more natural feel.

*Please be careful when handling your instrument as it is a soft case.

◆All linings are made of air mesh material. It acts as a cushioning material.

◆It can be stored even with the hand rest that comes with the instrument attached. You can also store the hand rest alone in the pocket. In that case, the instrument body has an interior belt to maintain stability.

◆The interior belt is adjustable and made of air mesh, so it is stable and has a one-touch buckle for smooth attachment and removal.

◆The main body zipper opens up to about 2/3 on both sides, so you can easily put it in and take it out.

◆The pocket that bulges out to the size of the main body can store hand rests and accessories. (There is no core material on the front side of the pocket)

◆The strap attachment position is lower than that of a normal bag to reduce the burden on the neck of the instrument.
◆Two shoulder straps are included. You can use it as a backpack, or you can use one on either side to carry it on your shoulder or across your body.

■Specifications
Color: Gray
Material: Surface: Nylon (PU double-coated on the back), Back: Polyester air mesh, Pocket lining: Rayon
Size: Approx. 28.5cm wide x 52cm long x 3-5cm thick (inner dimensions approx. 26cm x 48.5cm x 2.5-4cm), front pocket thickness approx. 2-3cm
*Width and length are measured at the longest point
*There are some areas where the core material is about 0.3-0.8cm thick.
*There may be slight differences due to manual sewing.
Included: 2.0cm wide straps x 2