ULTRASONE / ULT-LAPIS

ULTRASONE / LAPIS is a completely wireless earphone equipped with a 13mm diameter double Mylar film diaphragm and hybrid ANC.

■Newly developed 13mm double Mylar film diaphragm
・Equipped with a Mylar dynamic driver that uses a newly developed 13mm double Mylar film diaphragm. The Mylar driver has excellent transient characteristics and reproduces smooth, low-distortion linear sound. It also has excellent dynamic range, tight low range, and outstanding tone balance. In addition, playback is automatically paused when the earphones are removed from the ears, and playback is resumed when the earphones are put back in.

■Hybrid ANC and Ambient Mode
・Equipped with a hybrid ANC that achieves excellent active noise reduction by two ANC (active noise canceling) technologies, feedforward and feedback. Hybrid ANC is a fusion of feedforward ANC and feedback ANC into one system. This fusion recognizes environmental sounds outside the ear cups and generates anti-noise. LAPIS is equipped with four microphones in total, one on the outside of the ear cups and one on the inside, one on the left and one on the right. The internal microphone detects leaking noise and generates anti-noise to neutralize unwanted noise before it reaches your ears. This hybrid ANC, which uses both feedforward and feedback ANC, suppresses noise over a wide frequency range of 50 to 900 Hz, reducing noise by up to 32 dB. The hybrid ANC combines the advantages of both feedforward and feedback ANC, and can correct errors according to errors, making it less susceptible to the angle of the sound and wear of the user. You can switch between three types of modes: normal mode (ANC/ambient off), ANC mode, and ambient (external sound capture) mode.

■Hands-free calling with mono mode support
-Two microphones for calling focus on the voice and significantly reduce ambient noise. If you don't need to block out noise when calling in a quiet place, you can also make hands-free calls in mono mode with just one earphone.

■Supports Bluetooth 5.2 auto pairing
-Bluetooth 5.2, codecs SBC and AAC. Also supports auto pairing.

■Long playback time, fast charging, wireless charging support

-Bluetooth playback using ANC allows for up to 9 hours of continuous playback. Furthermore, if used with the charging case, it can be used for up to 45 hours. The charging case uses USB Type-C and supports fast charging. Approximately 10 minutes of charging allows for approximately 1 hour of use. In addition, the charging case supports wireless charging (Qi), so you can charge it cable-free if you use a compatible wireless charger.

■Excellent functionality and fit

-LAPIS uses touch control. Various functions can be switched with simple operations. It also meets the IP54 dustproof/waterproof standard, which protects against dust, rain, sweat, etc. It uses a stylish charging case that is compact and has a non-slip finish.

＜Specifications＞
■Driver: 13mm diameter Mylar dynamic driver
■Sensitivity: 110db
■Frequency band: 20-20KHz
■Impedance: 32Ω
■Touch control: Yes
■Noise canceling: Yes
■External sound capture function: Yes
■Dustproof and waterproof standard: IP54
■Microphone: Yes
■Bluetooth version: 5.2
■Profile: A2DP, AVRCP, HFP, HSP
■Supported codecs: SBC, AAC
■Auto pairing: Yes
■Multipoint connection: No
■Bluetooth compatible range: Approximately 15m
■Power battery: Built-in lithium polymer battery
■Battery capacity (main unit): 62mAh
■Battery capacity (case): 650mAh
■Continuous playback time (main unit): Approximately 9 hours
■Number of full charges: 4 times (when case is fully charged)
■Full charge time: Approximately 2 hours (main unit and case)
■USB shape: USB Type-C (charging only)
■Weight: Approx. 5g (main unit), Approx. 40g (case)
■Accessories: USB Type-C cable (for charging only), silicone ear pieces (S/M/L *M size is already attached to the main unit)
■Country of manufacture: China
■Warranty: 1 year for main unit, 90 days for accessories