UNI-PEX / ENQ-1102 Graphic Equalizer

A graphic equalizer that can boost or cut 10 points at 1/1 oct intervals from a center frequency of 31.5Hz to 16kHz. Equipped with a high-pass filter (fc=80Hz, -12dB/oct) and a low-pass filter (fc=12kHz, -12dB/oct). It can be turned on and off with a switch, and when the EQ switch is on, the gain can be adjusted by ±10dB with the gain control knob. When the power switch is off, the input terminal and output terminal are directly connected, and the unit is bypassed.

■Power supply: AC100V 50/60Hz
■Rated power consumption: 10W (based on the measurement method specified by the Electrical Appliance and Material Safety Law)
■Current consumption: AC0.1A (at rated output)
■Output: +4dB 600Ω unbalanced
■Input sensitivity and impedance: +4dB 10kΩ electronically balanced
■Frequency response: 20Hz to 20kHz +0.5dB -1dB
■Total harmonic distortion: 0.03% (20Hz to 20kHz +4dB)
■S/N ratio: 95dB or higher (JIS-A W.T.D.)
■Center frequency: 31.5, 63, 125, 250, 500, 1k, 2k, 4k, 8k, 16k (Hz) ±10%
10 points/channel (ISO standard 1/1oct)
■Variable range: ±12dB ±1.5dB
■Gain adjustment: ±10dB ±1.5dB (continuously variable, after passing through EQ)
■Maximum output: +20dB
■Display: POWER
■Input terminal: XLR-3-31 type, 3-pole large jack
■Output terminal: XLR-3-32 type, 3-pole large jack
■Additional functions: EQ ON-OFF switch
High-pass filter ON-OFF switch (80Hz -12dB/oct)
Low-pass filter ON-OFF switch (12kHz -12dB/oct)
■Operating temperature range: -10℃ to +55℃
■Exterior: Panel (aluminum): Munsell N1 approximation color black hairline finish
Case (steel plate): Munsell N1 approximation color black painted finish
■Dimensions: Width 480mm Height 48mm Depth: 234 mm
■Weight: Approx. 3.3 kg
■Accessories: M4 x 8 cross recessed hexagonal SEMS bolts x 4, φ5 decorative washers x 2,
M5 x 10 cross recessed hexagonal SEMS bolts x 4, M5 x 25 decorative screws x 2, instruction manual (with warranty) x 1