CLASSIC PRO / Easy BGM Set 7 CSC803+CMP120

This is a handy BGM set consisting of the CLASSIC PRO CSC803 line array speaker and CMP120 high impedance power amplifier.

■Easy BGM set
■Set contents
CSC803 line array speaker
CMP120 high impedance power amplifier
*Speaker cable sold separately.

＜CSC803＞
The CSC803 is a line array speaker ideal for music playback and presentations in store BGM, conference rooms, school classrooms, wedding halls, etc., where clear and comfortable sound is required.

The CSC series uses a 1.0mm mesh grill to protect the speaker from impact and dust, and uses a neodymium driver and a 3-inch full-range speaker in an aluminum alloy enclosure with rust-resistant paint. The lineup includes the CSC403 with 4 3-inch speakers and the CSC803 with 8 3-inch speakers. The CSC series achieves the wide horizontal and narrow vertical directivity unique to line array speakers, providing excellent reach and clear sound over a wide area. The multi-tap transformer supports both high and low impedance, and can be introduced into a variety of sound systems. A wall-mount bracket is also included, allowing the speaker body to be installed at an angle of 0 to 12° (4 levels). This line array speaker is ideal for music playback and presentations in places where clear and pleasant sound is required, such as store background music, conference rooms, school classrooms, and wedding halls.

■Recommended uses
BGM music playback, announcements, presentations
School classrooms, company conference rooms, wedding halls, churches, shopping malls, etc.
Restaurants, beauty salons, apparel stores, etc.

■Line array speaker
■Rated impedance
100V: 60/30/15W
70V: 60/30/15/7.5W
8Ω: 60W
■Sensitivity (1W/1m): 95dB
■Maximum SPL@1m: 114dB
■Frequency response (-6dB): 150Hz to 19kHz
■Low frequency transducer: 3-inch full-range speaker x8
■High frequency transducer: Neodymium driver x1
■Directivity angle (-6dB): H 150° x V +12 to -24°
■Connector: Phoenix connector (2P) x 1
■Enclosure: Aluminum alloy, rust-proof coating
■Dimensions (HxWxD): 784x90x93mm
■Weight: 4.0kg (including bracket)
■Wall-mount bracket included (0.35kg)
■1 unit

*Speaker stand mounting is not supported. Only wall mounting using the included wall-mount bracket is supported.


Switch between high impedance and low impedance, and adjust the level for each of the two microphone inputs and two external device inputs. The ultimate power amplifier for facilities that can be used in a variety of situations, such as store background music, venue announcements, and events! !

■High impedance/low impedance power amplifier for facilities
■Mono
■Input/output: 2 microphone inputs, 2 line inputs, 1 line output
*Line output (RCA) is a mixed signal of MIC1, MIC2, AUX1, and AUX2. The output level also changes in conjunction with each volume.
■Output wattage: 120W
■Input level: LINE/300mV, MIC/5mV
■Signal-to-noise ratio: LINE/>70dB, MIC/>65dB
■Output:
・High impedance: 50V, 70V, 100V
・Low impedance: 4-8ohms
■THD(1kHz): LINE/<0.1%, MIC/>0.3%
■Frequency response: 100Hz-16KHz
■Power consumption: 200W
■Dimensions and weight: 48.2Wx8.8Hx41Dcm・20kg