SONY / VPLVW275B

A projector equipped with a native 4K (4,096 horizontal x 2,160 vertical pixels) panel that faithfully reproduces 4K images. Equipped with Sony's unique "database-type super-resolution processing LSI (Reality Creation)". Equipped with "SXRD" for high-speed panel drive, minimizing the crosstalk phenomenon unique to 3D. "Auto calibration" function that automatically corrects color balance deviations.

■Projector, 18Gbps compatible, native 4K HDR high pressure mercury lamp model ●: Compatible -: Not applicable 〇Optical system ■Projection method: 3SXRD panel, 3 primary color LCD projection method ■Panel: Sony 0.74-inch 4K SXRD 26,542,080 pixels (8,847,360 x 3) (High frame rate compatible) ■Lens: 2.06x zoom 4K lens (electric) f21.7-44.7mm/F3.0-4.0 ■Shift: V: +0.85V/-0.80V (electric), H: +/-0.31H (electric) ■Projection size: 60-300 inches ■Light source: 225W/high pressure mercury lamp ■Recommended lamp replacement time (estimated, not guaranteed) *1: Approximately 6,000 hours (lamp control: low) ■Laser light source life (estimated, not guaranteed) *1: - ■Light output (factory default): 1,500 lumens *2 ■Dynamic contrast: - 〇Electrical system ■Color space: BT.709, BT2020 *3 ■Main supported signals: 480/60p, 576/50p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/60p, 1080/50p, 1080/24p, 3840 × 2160/24p, 3840 × 2160/25p, 3840 × 2160/30p, 3840 × 2160/50p, 3840 × 2160/60p, 4096 × 2160/24p, 4096 × 2160/25p, 4096 × 2160/30p, 4096 × 2160/50p, 4096 × 2160/60p ○Input terminals ■HDMI input terminals: 2 systems (supports 18 Gbps, supports HDCP 2.2, does not support CEC) ■Component input terminals: - ■PC input terminals: - ○Control terminals ■Trigger output: 1 system (mini jack: DC 12V, max. 100mA) ■RS-232C: D-sub 9-pin (convex) × 1 ■LAN: RJ-45 × 1, 10BASE-T/100BASE-TX ■IR IN / OUT: IN: 1 ■3D sync: - ■USB terminal: ● (DC 5V, max. 500mA) ○Others ■Reality creation: ● ■Contrast adjustment function: Dynamic HDR enhancer (HDR) *4/Contrast enhancer (SDR) ■Digital focus optimizer: - ■Mastered in 4K mode: ● ■Triluminos (R) display: ● ■HDR (High Dynamic Range): ● (HDR10/HDR Reference/HLG) ■Auto calibration: - ■Advanced Iris 3: - ■3D compatible: ● (Radio wave method) ■3D sync transmitter: Built-in ■Number of picture presets: 9 ■Number of gamma modes: 11 (10 types + off) ■Motion flow: ● (4K/2K) ■MPEG noise reduction: ● ■Picture position: - ■Latency reduction mode: ● ■Anamorphic zoom mode compatible: ● ■Lens shutter: - ■x.v.Color compatible: ● ■Deep Color compatible: ● ■V Keystone (trapezoid correction): - ■Cooling method: Air-cooled ■Menu language: Japanese 〇Dimensions, weight, etc. ■Power supply: AC100V, 50/60Hz ■Power consumption: Maximum: Approximately 390W (Standby: Approximately 0.4W/Remote start (on): Approximately 1W) ■Accessories: Remote control RM-PJ28, 2 AA batteries, projector power cord, lens cap, simple instruction manual, warranty card ■ Operating noise: Approx. 26 *5 ■ SIZE: 495.6 (W) x 205.3 (H) x 463.6 (W) mm (excluding protrusions) Approx. 14 kg *1 Each value is an estimate of the time until the brightness is reduced by half, and may vary depending on the usage environment and usage conditions *2 Colour luminous output is a measurement method for evaluating the colour performance of a projector. Colour luminous output can be used as an index to easily and accurately evaluate colour performance when selecting a product *3 Does not fully cover the colour gamut of ITU-R BT.2020 *4 Only bright areas *5 Values are approximate and may vary depending on the projector settings and usage environment