IMAGENICS / CRO-UD14

A simple 4-way HDMI distributor that complies with HDMI 2.0/1.4 and HDCP 2.2/1.4 standards. Supports almost all video and audio formats, including HDR video with HDMI 2.0 standard signals.

■4K HDMI (DVI) 1 input 4 distributor ■4K signal method: TMDS clock: 25 MHz to 340 MHz Pixel clock: 25 MHz to 600 MHz Data rate: 0.75 to 18 Gbps HDCP: 1.4/2.2 Supported resolutions: 4K60p 4:4:4 24bit, 4K60p 4:2:2 36bit, 4K30p 4:4:4 36bit, etc. ■Video signal method: TMDS signal (digital RGB/YPbPr) Pixel clock 25 MHz to 600 MHz (TMDS clock 25 MHz to 340 MHz) Automatically supports HDMI signals equivalent to 4K, D1 to D5, and PC signals from 640x480 to 4,096x2,160 Supports HDMI deep color signals up to 36 bits or standard compliant 24-bit full color signals ■HDMI input: 1 HDMI Type A 19-pin connector (HDCP 1.4, 2.2 compatible, DVI signal input possible) ■HDMI output: 1 HDMI Type A 19-pin connector with 4 distribution (HDCP 1.4, 2.2 compatible, automatic color space conversion and DVI signal output possible) *Automatic color space conversion (4K60YUV420, etc.) and down-conversion output to FHD are possible for each output terminal. ■Input cable length: PC (VESA), D5, etc., up to 30 m for videos up to 6 Gbps 4K30, 60 (420), etc., up to 20 m for videos up to 10.2 Gbps 4K60 (422,444), etc., up to 10 m *This applies when using our company's long HDMI cable and from our company's designated product output signal. This does not include output signals from consumer/household devices or products from other companies. ■Output side connection cable length: PC (VESA), D5, etc., up to 6 Gbps for videos up to 10 m 4K30, 60 (420), etc., up to 10.2 Gbps for videos up to 5 m 4K60 (422,444), etc., up to 3 m for videos up to 18 Gbps *This applies when using an HDMI cable manufactured by IMAGENICS. It may be shorter than this depending on the reception sensitivity of the display device. ■EDID emulation function: EDID data from the HDMI OUT-1 terminal is constantly copied and backed up for use. (Initial setting) DIP-SW No. 1 allows emulation of the equivalent of a typical 4K60 compatible TV or monitor. ■Other: Forced prohibition of input HDCP operation, adaptive color space conversion and down-conversion using acquired EDID data, message function using blinking two-color LED, etc. ■Power supply: DC 5V 0.8A 4W (max.) ■Accessories: AC 100V 27VA 50Hz/60Hz Domestic use only AC adapter x 1 (5V 2.3A output with lock) HDMI anti-slip bracket (CL-1) and cable tie x 5 sets The HDMI anti-slip bracket (CL-1) may not provide the intended anti-slip function depending on the thickness of the HDMI connector to be installed. ■SIZE: SIZE 100(W) x 25(H) x 150(D) mm (excluding protrusions) Approx. 550 g