TOA / WT-D1814

This is a stationary wireless tuner that can accommodate up to four 800 MHz digital wireless tuner units (two built-in, two additional units can be added) using a crystal-controlled PLL synthesizer system, and can also be rack-mounted using the MB-15B rack mounting bracket (sold separately).

Stable radio reception is possible by adopting a digital reception method that is resistant to interference and noise. It also provides convenient and reliable operation, with features such as control of external devices using contact output and system status monitoring using maintenance software. ■Product specifications Power supply: AC100 V 50/60 Hz Power consumption: 30W or less (when using 4 WTU-D1810 units) Receiving frequency: 800 MHz band Receiving sensitivity: 24 dBμV or less (bit error rate 1E-5 or less) SN ratio: 95 dB or more (using A-curve) Antenna input: 75 Ω BNC jack (antenna supply power DC9 V maximum 65 mA) Antenna input ATT: 0 dB/-10 dB 2-step switching Independent output Rated output: -10 dB(*1) 600 Ω electronically balanced XLR-3-32 equivalent (-36 dBFs input) Volume control knob maximum Mixing output: Rated output: -10 dB(*1) (line)/-60 dB(*1) (microphone), 600Ω, 2-step switching 3-pole horn jack: electronically balanced (3-pole plug) / unbalanced (2-pole plug) Mixing input: Rated input: -10 dB(*1), 600Ω, unbalanced, 2-pole horn jack Contact output: 4 systems, no-voltage make contact, contact capacity: DC30 V/0.5A, removable terminal block (8P) Frequency response: 50Hz to 12kHz Operating temperature range: -10 ℃ to +50 ℃ Operating humidity range: 30% to 85% RH (no condensation) Finish: Panel: Aluminum, hairline, black (approximate Munsell N1.0 color) Case: Surface-treated steel plate, black (approximate Munsell N1.0 color), painted Dimensions: 420(W) x 45.9(H) x 300.7(D)mm Weight: 4.3kg Accessories: Power cord (2 m)...1, Color mark (15 types)...1, Cord with horn plug (1m)...1, Setting screwdriver...1, Detachable terminal plug (4P)...2 Optional items: Digital wireless tuner unit: WTU-D1810 (2 units can be added) Rack mounting bracket: MB-15B BNC plug (1 piece included): YA-641 (screw type), YA-642 (soldered type) (＊1) 0 dB = 1 V * The optional expansion WTU-D1810 can be installed from the front of the panel. * Please note that using a tuner unit other than the WTU-D1810 may cause a malfunction. * Cannot communicate with TRANTEC digital wireless systems (S-D7200-JB, S-D7300-JB, etc.). * Cannot communicate with analog wireless systems (WM-1220, WM-1320, etc.). *Up to three antenna boosters YW-1000 (sold separately) can be connected to the antenna input terminals A1 and A2 in total, and up to three antenna boosters YW-1000 (sold separately) can be connected to B1 and B2 in total. Also, up to two units can be connected in series to each terminal. *Please download the maintenance software from the TOA Product Data Download Site (https://www.toa-products.com/download/).