CLASSIC PRO / CIP10 + CQP452 x 8 sheets set with adhesive

This is a set of isolation pads and sound-absorbing material for CLASSIC PRO monitor speakers.

◆Isolation pad + sound absorbing material set for monitor speakers ■CIP10 (Isolation pad) Place under the speaker to reduce resonance with the desk or speaker stand. Ideal for monitor speakers up to 5 inches. - Dimensions (WxDxH): 27 x 19 x 5cm (Upper + Lower cushion, angle: 0 degrees) - The angle can also be adjusted by combining the Upper and Lower cushions. - For 2 units ============================== ■CQM452 (Sound absorbing material) Place behind the speaker to prevent unnecessary overtones and room resonance. - Shape: Mountain-shaped - Size (WxDxH): 45 x 45 x 2.5cm - Number of sheets: 8 sheets (2 sets of 4 sheets) - Total area: 1.62m2 ================================ ■Neo Strong MS (adhesive) Can be applied by pushing out by hand without using a caulking gun. - Capacity: 1.2kg *When applied to all four sides, one bottle will adhere approximately 10 sheets of sound-absorbing material measuring 60cm square. This varies depending on the adhesive method, and manufacturers state that it takes approximately one bottle to adhere for every 10-20m. ■How to use 1. Remove any water, debris, dust, oil, or other substances that may cause poor adhesion from the adhesive surface. 2. Cut the tip of the nozzle so that it is at least 6mm in diameter. 3. Remove the inner cap from the aluminum bag and break the internal protective coating. 4. Apply adhesive to the bonding surface with a diameter of 6mm or more.