CLASSIC PRO / CIP10 + CQP305 x 4 sheets set, adhesive attached

This is a set of isolation pads and sound-absorbing material for CLASSIC PRO monitor speakers.

◆Isolation pad + sound absorbing material set for monitor speakers ■CIP10 (Isolation pad) Place under the speaker to reduce resonance with the desk or speaker stand. Ideal for monitor speakers up to 5 inches. - Dimensions (WxDxH): 27 x 19 x 5cm (Upper + Lower cushion, angle: 0 degrees) - The angle can also be adjusted by combining the Upper and Lower cushions. - For 2 units ============================== ■CQP305 (Sound absorbing material) Place behind the speaker to prevent unnecessary overtones and room resonance. - Shape: Pyramid - Size (WxDxH): 30 x 30 x 5cm - Number of sheets: 4 sheets (4 sheets x 1 set) - Total area: 0.36㎡ ================================= ■Neo Strong MS (adhesive) It can be applied by pushing it out by hand without using a caulking gun. - Capacity: 1.2kg * When applied to all four sides, the number of sheets that can be glued per bottle is about 10 sheets for a 60cm square sound absorbing material. This varies depending on the adhesive method, and the manufacturer's nominal value is that about one bottle is consumed for every 10 to 20m. ■How to use 1. Remove any water, debris, dust, oil, etc. from the adhesive surface that may cause poor adhesion. 2. Cut the tip of the nozzle so that it is at least 6mm in diameter. 3. Remove the inner cap from the aluminum bag and break the internal protective coating. 4. Apply adhesive to the bonding surface with a diameter of 6mm or more.