CLASSIC PRO / CIP10 + CQM305 x 8 sheets set with adhesive

This is a set of isolation pads and sound-absorbing material for CLASSIC PRO monitor speakers.

◆Isolation pad + sound absorbing material set for monitor speakers ■CIP10 (Isolation pad) Place under the speaker to reduce resonance with the desk or speaker stand. Ideal for monitor speakers up to 5 inches. - Dimensions (WxDxH): 27 x 19 x 5cm (Upper + Lower cushion, angle: 0 degrees) - The angle can also be adjusted by combining the Upper and Lower cushions. - For 2 units ============================== ■CQM305 (Sound absorbing material) Place behind the speaker to prevent unnecessary overtones and room resonance.・Shape: Mountain-shaped ・Size (WxDxH): 30 x 30 x 5cm ・Number of sheets: 8 sheets (4 sheets x 2 sets) ・Total area: 0.72㎡ ================================= ■Neo Strong MS (adhesive) It can be applied by pushing it out by hand without using a caulking gun. ・Capacity: 1.2kg *When applied to all four sides, the number of sheets that can be glued per bottle is about 10 sheets for a 60cm square sound absorbing material. It depends on the adhesive method, and the manufacturer's nominal value is that about one bottle is consumed for every 10 to 20m. ■How to use 1. Remove any water, debris, dust, oil, etc. that may cause poor adhesion from the adhesive surface. 2. Cut the tip of the nozzle to a diameter of 6mmφ or more. 3. Remove the inner cap of the aluminum bag and break the protective coating inside. 4. Apply adhesive to the bonding surface with a diameter of 6mm or more.