IMAGENICS / CRO-UD12

This is a 1-input 2-output distributor with EDID emulation and cable compensation. It supports digital video and audio signals that comply with the HDMI 1.4 and HDMI 2.0 standards. It supports 4K to Full HD down-conversion and 4K＠60 444 to 4K＠60 420 color conversion functions automatically!

■4K HDMI (DVI) 1 input 2 distributor (cable compensation, EDID emulator, audio embedding, de-embedding) ■4K signal method: TMDS clock: 25 MHz to 340 MHz Pixel clock: 25 MHz to 600 MHz Data rate: 0.75 to 18 Gbps HDCP: 1.4/2.2 Supported resolutions: 4K60p 4:4:4 24bit, 4K60p 4:2:2 36bit, 4K30p 4:4:4 36bit, etc. ■Video signal method: TMDS signal (digital RGB/YPbPr) Pixel clock 25 MHz to 600 MHz (TMDS clock 25 MHz to 340 MHz) Automatically supports HDMI signals equivalent to 4K, D1 to D5 and PC signals from 640x480 to 4,096x2,160 Supports HDMI deep color signals up to 36 bits or 24-bit full color standard compliant signals ■HDMI input: 1 HDMI Type A 19-pin connector (HDCP 1.4, 2.2 compatible) ■HDMI output: 1 HDMI Type A 19-pin connector with 2 distributions (HDCP 1.4, 2.2 individually supported for each output) ■Input cable length: PC (VESA), D5, etc. for videos up to 6 Gbps - up to 30 m 4K30, 60 (420), etc. for videos up to 10.2 Gbps - up to 20 m 4K60 (422,444), etc. for videos up to 18 Gbps - up to 10 m *This applies when using our long HDMI cable and from our specified product output signal. Excludes output signals from consumer/household devices and products from other companies. ■Output connection cable length: PC (VESA), D5, etc. Video up to 6 Gbps - 10 m 4K30, 60 (420), etc. Video up to 10.2 Gbps - 5 m 4K60 (422,444), etc. Video up to 18 Gbps - 3 m *When using our HDMI cable. It may be shorter depending on the reception sensitivity of the display device. ■Output connection cable length: PC (VESA), D5, etc. Video up to 6 Gbps - 10 m 4K30, 60 (420), etc. Video up to 10.2 Gbps - 5 m 4K60 (422,444), etc. Video up to 18 Gbps - 3 m *When using our HDMI cable. It may be shorter depending on the reception sensitivity of the display device. Analog audio function (Common to both embedded and de-embedded operation. Either embedded or de-embedded can be selected for use) ■Audio input terminal: -10 dBu approx. 50 kΩ unbalanced 2-channel 1 system (2 x RCA pin jack) ■Audio output terminal: -10 dBu (10 kΩ or more loaded) low impedance unbalanced 2-channel 1 system (2 x RCA pin jack) ■Audio frequency response/S/N ratio: -1dB to +1 dB at 20 Hz to 20 kHz/80 dB or more (1 kHz A-weighted, reference -10 dBu output) ■Audio crosstalk/distortion rate: 80 dB or more/0.03 % or less (10 kΩ or more loaded) ■Audio sampling frequency: When de-embedded: 24 bit 32 kHz to 192 kHz linear PCM method When embedded: 24 bit 48 kHz linear PCM method ■Maximum audio level: Input: +10 dBu (When HDMI embedded audio is at 0dBFS) Output: +10dBu (When HDMI embedded audio is at 0dBFS) ■Other: - Fully automatic color space conversion function by matching with EDID data on the output terminal side (including YPbPr444 (422) ⇔ YPbPr420 for 4K video) - Color and flash assignment function using two-color LED to indicate input/output status - 4K → D5 video down-conversion function for non-4K compatible devices, etc. ■Power supply: DC 5 V 1.3 A 6.5 W (maximum) ■SIZE: 100 (W) x 25 (H) x 150 (D) mm (excluding protrusions) Approximately 550g ■Accessories: AC100V 27VA 50 Hz/60 Hz Domestic-only AC adapter x 1 (5V 2.3A with output lock) HDMI anti-pullout bracket (CL-1)) and 3 sets of cable tie bands