IMAGENICS / CRO-UD12

1 input 2 distributor with EDID emulation function and cable compensator. Supports digital video and audio signals that comply with the HDMI 1.4 and HDMI 2.0 standards. Fully automatic support for 4K to full HD down conversion function and 4K @ 60 444 to 4K @ 60 420 color conversion function!

■ 4K HDMI (DVI) 1 input 2 distributor
(Cable compensator, EDID emulator, voice embedded, de-embedded)
■ 4K signal method:
TMDS clock: 25 MHz to 340 MHz
Pixel clock: 25 MHz to 600 MHz
Data rate: 0.75-18 GbpsHDCP: 1.4 / 2.2
Supported resolutions: 4K60p 4: 4: 4 24bit, 4K60p 4: 2: 2 36bit, 4K30p 4: 4: 4 36bit, etc.
■ Video signal method:
TMDS signal (digital RGB / YPbPr) Pixel clock 25 MHz to 600 MHz (TMDS clock 25 MHz to 340 MHz)
Automatically supports HDMI signals equivalent to 4K, D1 to D5 and PC signals from 640x480 to 4,096x2,160
Supports deep color signals up to 36 bits or 24-bit full color standard compliant signals of HDMI signals
■ HDMI input:
HDMI TypeA 19-pin connector 1 system (HDCP 1.4, 2.2 compatible)
■ HDMI output:
HDMI TypeA 19-pin connector 1 system 2 distribution (HDCP 1.4, 2.2 are individually supported for each output)
■ Input cable length:
Video up to 6 Gbps such as PC (VESA), D5 ~ 30 m
Video up to 10.2 Gbps such as 4K30, 60 (420) ~ 20 m
Video up to 18 Gbps such as 4K60 (422,444) ~ 10 m
* When using our HDMI long cable and using the output signal of our designated product.
Excludes output signals from consumer / household equipment and products of other companies
■ Output side connection cable length:
Video up to 6 Gbps such as PC (VESA), D5 ~ 10 m
Video up to 10.2 Gbps such as 4K30, 60 (420) ~ 5 m
Video up to 18 Gbps such as 4K60 (422,444) ~ 3 m
* When using our HDMI cable.
It may be shorter than this due to the reception sensitivity of the display device.
■ Output side connection cable length:
Video up to 6 Gbps such as PC (VESA), D5 ~ 10 m
Video up to 10.2 Gbps such as 4K30, 60 (420) ~ 5 m
Video up to 18 Gbps such as 4K60 (422,444) ~ 3 m
* When using our HDMI cable.
It may be shorter than this due to the reception sensitivity of the display device.
Analog voice function
(Common to embedded and de-embedded operations. Either embedded or de-embedded can be selected and used)
■ Audio input terminal:
-10 dBu Approximately 50 k? Unbalanced 2 channels 1 system (RCA pin jack x2)
■ Audio output terminal:
-10 dBu (at load of 10 k? Or more) Low impedance unbalanced 2 channels 1 system (RCA pin jack x2)
■ Voice frequency characteristics / S / N ratio:
-1 dB to +1 dB / 80 dB or more at 20 Hz to 20 kHz (1 kHz A characteristic, standard -10 dBu output)
■ Voice crosstalk / distortion factor:
80dB or more / 0.03% or less (when loaded with 10k? Or more)
■ Audio sampling frequency:
At the time of deembedet: 24 bit 32kHz to 192kHz
Linear PCM method embedded: 24 bit 48 kHz Linear PCM method
■ Maximum audio level:
Input: + 10dBu (at 0dBFS for HDMI embedded audio)
Output: + 10dBu (at 0dBFS for HDMI embedded audio)
■ Others:
-Fully automatic color space conversion function by matching with EDID data on the output terminal side (including YPbPr444 (422) ⇔ YPbPr420 for 4K video)
-Color and flash assignment function with 2-color LED in input / output state
・ 4K → D5 video down-conversion function for non-4K compatible devices, etc.
■ Power supply: DC 5 V 1.3 A 6.5 W (maximum)
■ SIZE: 100 (W) x25 (H) x150 (D) mm (excluding protrusions) Approx. 550g
■ Accessories: AC100V 27VA 50 Hz / 60 Hz 1 domestic AC adapter (with 5V 2.3A output lock)
HDMI retaining bracket (CL-1)) and 3 sets of cable ties