ATOMOS / ATOMXSYNC1

This wireless timecode device is attached to the back of the NINJA V and provides timecode overlay and synchronization functions. It realizes synchronization control for up to 100 NINJA Vs equipped with the same module within a range of 200m. It enables synchronization between recording devices when using consumer DSLR cameras, mirrorless cameras, or recording audio separately.

■V Module for NINJA ■Compatible Products NINJA V HDMI Recorder & Monitor By installing an AtomX SDI module on the Ninja V, SDI input/output functionality is implemented, allowing you to take advantage of the Ninja V's high-brightness 1000nit 1920x1080 HDR-compatible screen while handling professional SDI sources such as broadcast, film, and commercial cameras. The SDI connector has two 12G SDI ports, which can be set as input or output. In SINGLE mode, when one of the two ports detects input, the other becomes the output. In SELECT mode, the two systems can be set as separate SDI inputs. DUAL mode supports dual link input from a specific camera. *SDI RAW input is not supported. *HDMI input video is not output from SDI. Conversely, SDI input is not output to HDMI, so so-called cross conversion is not supported. *Cross-conversion from HDMI input to SDI output and from SDI input to HDMI output is supported with firmware 10.61 or later. However, cross-conversion of RAW video (video output) is supported with the paid activation of SDI RAW below. *SDI RAW input is supported with firmware 10.61 or later for a fee. Compatible with Sony FX9 with XDCA-FX9, FX6 Panasonic Varicam LT, EVA-1 Canon C500,C300MKII. SDI RAW video from Sony FS7, FS700, FS5 is not supported.