ATOMOS / SHOGUN 7

ATOMOS / SHOGUN 7 is an HDR monitor / recorder / switcher designed for film and video professionals. It is equipped with 4 ISO monitoring and simultaneous recording functions. By using a camera that supports HDMI 2.0, you can record at up to 4Kp60.

■7-inch HDR Pro, Film Production Monitor/Recorder/Switcher Shogun 7 main unit, Master Caddy II x1, 12V-3A AC adapter x1, Carry case x1, Quick Start Guide x1 ■Touchscreen ・Screen size: 7.2 inches ・Screen resolution/PPI: 1920 x 1280/325PPI ・Aspect ratio (video display): 16:9 ・Supported color gamut: Up to wide color gamut (105% DCI-P3) ・LUT support: 3D LUT (.cube format) ・Anamorphic squeeze support: 2x, 1.5x, 1.33x ・LCD/Touch panel: Dynamic AtomHDR zone backlit IPS LCD ■Dynamic AtomHDR technology ・Backlight: Direct LED ・Zone: 360 direct backlit LED ・LED: Wide color calibration D65 or D95 ・LCD drive bit depth: 10-bit (8+2 FRC) ・Color: DCI-P3 105% ・Maximum brightness: 3000nits (+/- 10%) ・LED control: Brightness analysis in real time ・HDR conversion: Log/RAW to HLG or PQ ■HDR monitoring ・Gamma: Sony SLog / SLog2 / SLog3 Canon CLog / CLog2 / Clog3 ARRI Log CEI160 / LogCEI200 / LogCEI250 / LogCEI320 / LogCEI400 / LogCEI500 / LogCEI640 / LogCEI800 / LogCEI1000 / LogCEI1280 / LogCEI1600 Panasonic Vlog JVC JLog1 RED Log3G10 / RED LogFilm FujiFilm F-log Nikon N-Log PQ10k HLG ・Gamut: Sony SGamut / SGamut3 / SGamut3.cine Canon Cinema / DCI P3 / DCI P3+ Nikon Bt2020 Panasonic V Gamut Arri Alexa Wide Gamut Rec709 / BT.2020 JVC RED WideGamut / RED DragonColor / DragonColor2 / RED Color2 / RED Color3 / RED Color4 ■Video input terminal: ・HDMI: 1 x HDMI (2.0) ・SDI: Quad Link 4x 3G/6G SDI*, 4x 3G-SDI, 2x 12G Single Link SDI *Planned to be supported by a firmware update ・Supported video input signals Uncompressed 10/8bit 4:2:2 (camera dependent) ・Genlock Input signal, Output signal ■Video output terminal: ・HDMI: 1 x HDMI (2.0) ・SDI: 1x 4K-SDI 12G, HD-SDI 3G/6G ・Supported video output signals: Uncompressed 10/8bit 4:2:2 (depends on playback video) ■Supported codecs/frame rates (recording & playback) ・Raw to: ProRes RAW ProRes CinemaDNG (CDNG up to 4k30p only) Avid DNxHD ・Sony^^FS700, FS-5, FS-5MkII, FS-7, FS-7MkII: 4K DCI; 24/25/30/50/60p 4K UHD; not supported in camera 2K;24/25/30/50/60/100/120/200/240p 1080; not supported in camera ・Canon/C300MKII/C500: 4K DCI; 24/25/30p 4K UHD; 24/25/30p 2K;not supported in camera 1080; not supported in camera Panasonic/VaricamLT, EVA1: 5.7K DCI; 24/25/30p (EVA1 ProRes RAW only) 4K DCI; 24/25/30/50/60p 4K UHD; 24/25/30/50/60p 2K;24/25/30/50/60/100/120/200/240p 1080; not supported in camera Supported base resolutions and frame rates from the camera: 4K DCI: 23.98/29.9/59.94p 4K UHD: 23.98/29.9/59.94p 2K DCI: 23.98/29.9/59.94p 1080p: 23.98/29.9/59.94p ・Supported frame rates and resolutions from gaming consoles and graphics cards: 1080p; 24/25/30/50/60/100/120 ^^ RAW output requires optional unit (XDCA-FS7) or paid update On-board processing (format conversion) ■Audio input/output ・HDMI: 2/8ch 48kHz 24bit (camera dependent) ・SDI: 12ch 48kHz 24-bit ・Analog audio: 2ch balanced input compatible XLR breakout cable (XLR output supported with optional cable) Dynamic range 90dB or more, maximum signal level +24dBu, maximum gain +52dB 48V phantom power compatible, 2ch 48kHz 24-bit ・Headphone output: 3.5mm 2ch ・Built-in speaker: - ■Remote control functions ・HDMI: HDMI recording trigger compatible with Canon, Sony, and other camera manufacturers ・SDI: SDI recording trigger Select camera from the SDI trigger menu ・Other: LANC slave mode ■Playback functions ・Playlist: Supported ・Genlock/LTC: Supported ・CDNG (recorded files): Playback not supported ・ProRes: Playback supported (slow motion playback at 2K/HD 100p or higher) ・DNxHR / DNxHD: Playback supported (slow motion playback at 2K/HD 100p or higher) ■Recording functions: ・Pre-roll recording: Supported (HD 8 sec, 4K 2 sec) ・Custom time lapse: Support will be available via a firmware update ・Supported recording media*: 2.5-inch SSD ・Master caddy (media case): 75mm x 105mm x 12mm ・USB docking station: 2.5-inch SATA , USB 2.0/3.0/USB-C 3.1 (sold separately) Compatible editing software: Final Cut Pro / Media Composer / Premiere Pro / After Effects / EDIUS / Vegas Pro / Lightworks / Autodesk Smoke Mounting screw holes: Top: 1/4 inch x 1, bottom: 1/4 inch x 1 Housing material: ABS resin Size: 214 (W) x 127 (H) x 45 (D) mm, 709 g *Batteries etc. not included