BEHRINGER / 130 DUAL VCA

Faithful and affordable reproduction of the sounds of the golden age of electronic music in the 80's. Features three Sig In signal input jacks with gain controls. The module's output can be further modified to be linear or exponential (exponential) using a switch next to the gain knob.

Features

Dual VCA module that is an authentic reproduction of the legendary “System 100M” circuit from the 80's
Each VCA has manual gain control and two audio outputs (low/high) with signal and clip indicators
Linear/exponential (exponential change) switch for each VCA for flexible timbre changes
3-channel mixer per VCA allows independent mixing for all input signals
16 controls and switches provide real-time access to all parameters
Eurorack specifications: 16HP, 30mA +12V, 20mA -12V

Specifications

◆Analog synthesizer module

3.5mm jack x 6
Impedance: > 50 kΩ unbalanced
Maximum input level: +18 dBu @ unity gain
VCA Output: High/Low 3.5mm jack x 4
HIGH OUT: Impedance 1 kΩ unbalanced
LOW OUT: Impedance 3kΩ unbalanced
HIGH maximum output level: +18 dBu
LOW maximum output level: -2 dBu
HIGH OUT noise: <-66 dBu, 22 Hz-22 kHz
LOW OUT noise: <-86 dBu, 22 Hz-22 kHz
Mod in: 3.5 mm jack x 6
Impedance: > 50 kΩ unbalanced
CV Input Range: 0 V to +10 V
CV scaling EXP mode: typically 1 V / 10 dB:
Initial gain control: 2 rotary knobs (linear / expenential switchable<)/li>.
Sig in level : Rotary knob x 6
Mod in level : Rotary knob x 6
Linear / exponential CV: 2 x slide switch
Power supply: Eurorack
Current: 30mA (+12 V), 20mA (-12 V)
Dimensions (H x W x D) 44 x 81 x 129 mm
Mass: 0.18 kg