ESP / TM20 Aluminum -Define- No.15

Based on the traditional TOM style bridge, this is a new design of the TM20 guitar bridge, aluminum specification, green color. The string and octave screw are designed to be offset from the center, eliminating the part of the bridge that interferes with the string. The string tension is concentrated on the saddle, eliminating buzzing. It also makes it easier to access the octave screw on the body end.

■Guitar bridge
■ESP Custom Lab Ultimate Series
■Aluminum version with rich overtones and natural sustain
■Features
・A bridge that incorporates a new design while following the traditional Tune-Matic style bridge
・The strings are shifted from the center of the saddle, and the design offsets the strings and the octave screws.
・The part of the bridge that interferes with the strings at the rear can be cut, concentrating the string tension on the saddle and eliminating chatter
・The screws on the body end are easily accessible, and cap screws using hex wrenches are used, allowing for stress-free octave adjustment
・The base plate is machined from solid aluminum with high precision by CNC machining, with a radius on the top surface and cuts on the edges to provide a moderate grip without any snags
・The surface is anodized. The cut edge is machined after anodizing to achieve a beautiful aluminum luster.

- The stud section combines a wood screw-style stud bolt with a tubular top and a stud nut with a groove for a flathead screwdriver, achieving both a direct sound and easy string height adjustment.

- The clearance between the body and the stud nut is tight, reducing excess play and tilt.

- It can be replaced with a wood screw-style Tune-Matic without any processing, but we recommend changing the stud bolt (wood screw) to the included stainless steel one. For stud anchor style Tunematics, the studs and anchors can be replaced without modification by using the original ones.
■String pitch: 10.4mm
■Material
・Aluminum A5052: Base plate
・Brass: Saddle & stud nut
・Stainless steel: Stud bolt & octave screw
■Accessories: 2 stud nuts, 2 stud bolts, hex wrench (2mm)
■Average weight: Approximately 52g (including studs)
■Color: Green

*Image is for illustrative purposes only.
*Please allow approximately 3-4 months for order production. Please note that orders cannot be canceled after ordering.
*The string grooves are shallow for positioning purposes, but we recommend that you process them to match the strings you are using.
*The clearance of the studs is designed to be tighter than usual, so processing such as re-drilling the stud holes may be required.
*Even for compatible models, processing may be required depending on the condition of the guitar.