ここから本文です

さうんどはうしゅ

Saramonic / UwMic9-JP Kit2

Saramonic / UwMic9-JP Kit2

  • Saramonic / UwMic9-JP Kit2画像1
  • Saramonic / UwMic9-JP Kit2画像2
  • Saramonic / UwMic9-JP Kit2画像3
  • Saramonic / UwMic9-JP Kit2画像4
  • Saramonic / UwMic9-JP Kit2画像5
  • Saramonic / UwMic9-JP Kit2画像6
  • Saramonic / UwMic9-JP Kit2画像7
10
  • 動画を見るMovie
  • メーカーサイトManufacturer Site
  • 製品マニュアルProduct Manual
A wireless system that includes a camera-mountable receiver and two transmitters that support 3.5mm mini-jack input. The receiver has a headphone input that allows real-time monitoring, making it convenient for shooting with cameras that do not have a monitor function. The transmitter is equipped with a mute function. A lavalier microphone with a clip is included, so you can use it from the day it arrives. Ideal for video shooting on YouTube, interviews, etc.
■Wireless lavalier microphone system
2ch can be used simultaneously
806.125MHz - 809.500MHz
Headphone monitoring possible
Number of units that can be used in the same area: Up to 2 sets


UwMic9 RX9 receiver x1
UwMic9 TX9 transmitter x2
Clip-on lavalier microphone x2


Transmission method: PLL Synthesizer
Maximum reach: Up to 60 meters
Output connector: 3.5mm mini jack
Power requirements: 2 AA batteries
Weight: Approximately 218.7g (excluding batteries)
External dimensions: 170.9 x 63.5 x 30.0 mm


Transmission type: PLL Synthesizer
Maximum reach: Up to 60 meters
Frequency band: 806.125MHz - 809.500MHz
Signal to noise ratio: 70 dB or more
Audio input connector: 3.5mm mini jack
Power requirements: 2 x AA batteries
Audio input: 3.5mm TRS lavalier microphone input
Weight: Approx. 211.4g
Dimensions: 170.9 x 63.5 x 30.0 mm

Set the receiver channel in the following way.
① Use the auto scan function
1. Use the + or - button to display the auto scan screen.
2. Press and hold the SET button to select ""Auto scan?""
3. Press the SET button to confirm.
4. The display will show ""Use CH..."" and the channel with the least noise and interference will be displayed.
5. Press the SET button within 20 seconds to confirm the channel.

② Set the receiver channel manually
1. Use the + or - button to display the channel menu on the receiver.
2. Press and hold the SET button to select the menu.
3. Use the + or - button to select the desired channel.
4. Press the SET button briefly to confirm.

After completing the receiver setup, follow the steps below to set up the transmitter.

1. Use the + or - button to display the ""Match with TX"" menu on the receiver.
2. Use the + or - button to display the ""Match with RX"" menu on the transmitter.
3. Press and hold the SET button to select the menu, then press it briefly to confirm.
4. Place the receiver's infrared transmitter port close to the transmitter's infrared detector.
5. The screen will display ""Sync finished!"" and the frequency used by the transmitter will be set. [LF]

関連商品

商品レビューProduct Review

  • 総合評価Avg. Rating11110(4)
  • レビュー数Reviews2
5
0件
4
2件
3
0件
2
0件
1
0件

2021/02/28

1111コストパフォーマンス最高!ただ他のメーカーと比べちゃダメ

投稿者名Reviewed byPヤマ 【神奈川県】

最初に申し上げたいのは「コストパフォーマンスは最高です!」
4万円台前半(2021/2/28現在)で2波のB帯ワイヤレスが購入でき、
かつ音質もそこそこである、という点を見ればコストパフォーマンスは最高と言わざるを得ません。
ただしそこには「他メーカーと比較しない」という点が重要かなと思います。
当たり前ですが、SennheiserやSURE、SONYなどといった定番メーカーが出しているラベリアワイヤレスマイクと比較すると、その差は歴然です。
まず気になったのは送信機側の重さです。
腰や服のポケットに入れると考えると、211gは重い様に感じました。
おそらくデザインの元となってるSONYのUWP-D21や11と比べると、100g弱の差があります。
例えば、歩きながら使用する場合、徐々にこの重さで洋服が引っ張られていく、なんてことも起きるかと思います。
次に気になるのは、言葉尻に乗るノイズです。
ホワイトノイズの様な、サーという感じのノイズが必ず言葉尻に乗ります。
これは内部の処理の問題かと思いますが、他メーカーに比べても大きく、ゲイン高めで収録すると、どうしても気になってしまいます。
以上の点が特に気になる2つのポイントでしたが、これらはあくまでも他メーカーの製品を使ったことがあるからです。
初めてのワイヤレスマイクで、とにかくコストパフォーマンスの高いものをという方にはぴったりハマる製品かと思います。

レビューIDReview ID:115222

2021/02/15

1111気になる 使用できる周波数について・・・

投稿者名Reviewed byおれ… 【東京都】

仕様もろもろみて、何となく使えそうなので人柱的に購入してみました
使用設定できる周波数Chですが、購入前に問合せしましたが、
イマイチ求めていた回答が得られなかったのもありましたが・・・
まぁ、値段も値段だし・・・PLLだしそんな変な物でもないだろうと・・・
購入してみました。
肝心のCh設定ですが、どうやらパッケージごとにおおよそのグループ分けされているようで・・・(当方購入の物は、設定5とパッケージに記載してありました)
その、パッケージの割り当て?Chは、以下の通りでした
ChAは、B11・B22・B32・B61・B51
ChBは、B43・B53・B54・B44・B16
設定となっていました。。。
まぁ、使用は今からですが・・・
筐体自体はプラスチックではなく、アルミ筐体なので結構しっかり作られています
あっ、あと製品をいろいろなところで調べると、当然ながら海外仕様の500MHz
とかの、割り当てになってますが、サウンドハウスさんで購入したらちゃんと
日本向け仕様800MHzで、技適マークもちゃんとついておりました・・・
まぁ、周波数設定が指定Chだけでなく、別途設定でB帯全部設定出来れば、
評価5なんだけどなぁ・・・
値段も値段なのでそこはしょうがないのかな・・・と言う事で-1の評価4で・・・

レビューIDReview ID:114717

Saramonic
UwMic9-JP Kit2

Item ID:279745

Regular Price:¥62,800(incl. tax)

¥53,000(incl. tax)

  • Free Shipping

5,300Pt(10%)Detail

  • 530Pts

    通常ポイント

  • 4,770Pts

    ポイント10倍キャンペーン

  • 5,300Pts

    Total

close

限定特価

在庫ありIn Stock

Qty

Popular Alternatives

Add to Wishlist(Login)

Rating11110

Reviews:2

この商品に関連するセレクションRelated Articles

Categories

Search by Brand

Brand List
FACEBOOK LINE YouTube X Instagram TikTok