ROLAND / HT-RX01

Connect with an Ethernet cable and transmit HDMI signals up to 100m!

■ Compatible models
XS-84H (8 input / 4 output model)
XS-83H (8 input / 3 output model)
XS-82H (8-input / 2-output model)
■ Supported resolutions:
480 / 59.94i, 576 / 50i, 480 / 59.94p, 576 / 50p, 720 / 59.94p, 720 / 50p, 1080 / 59.94i, 1080 / 50i,
1080 / 59.94p, 1080 / 50p, 640x480, 800x600, 1024x768, 1280x768,
1280 x 1024, 1366 x 768, 1400 x 1050, 1600 x 1200, 1920 x 1200
*RGB format: VESA DMT Version 1.0 Revision 11 compliant
*The refresh rate of RGB format is 60Hz at 1600 × 1200 and 1920 × 1200, and the maximum is 75Hz in other cases.
*1920 × 1200 / 60Hz: Reduced blanking
■ Audio signal:
Maximum PCM 8ch, Dolby Digital, True HD DTS-HD Master Audio
■ Input terminal:
HT-TX01: HDMI x 1: Type A (19 pins)
HT-RX01: RJ45 x 1
■ Output terminal:
HT-TX01 RJ45 x 1
HT-RX01 HDMI x 1: Type A (19 pins)
■ RS-232 × 1:
9-pin D-sub type
*When using the included RS-232 conversion cable
Communication method: Asynchronous full-duplex
Communication speed: 9600bps, 19200bps, 38400bps, 115200bps
Parity: None, Data length: 8bit, Stop bit length: 1bit
Code system: ASCII, Flow control: None
■ Transmission distance up to 100m:
* For the HDBaseT terminal, use a shielded LAN cable of Cat5e (category 5e) or higher. If an improper cable is connected, the signal quality may deteriorate and video transmission may be interrupted. If you use an unshielded LAN cable, the unit may be damaged by static electricity.
* The transmission distance varies depending on the cable quality.
■ Accessories:
AC adapter
Plug (3 types)
RS-232 conversion cable (2m)
Ferrite core (3 pieces)
Instruction manual (including warranty)
■ SIZE: 81 (W) x24 (H) x93 (D) mm 300g (excluding AC adapter)