ESI / U108 PRE Audio Interface

Audio interface with 10 channels of microphone input. Comes with a reassuring 3-year Sound House warranty!

■USB audio interface
■24bit
■10IN/8OUT, 10CH mic preamps
The U108 PRE is a 24bit USB audio interface with 10 mic preamps, perfect for multi-channel recording.

All mic inputs, 2 on the front and 8 on the rear, are equipped with +48V phantom power, allowing you to connect both dynamic and condenser mics. The 2 front channels are also XLR/TRS combo terminals that can be used as Hi-Z terminals, allowing you to directly connect guitars and other devices.

It also has 8 independent output terminals, and the included control panel allows you to send submixes and parallel outputs to a mixing console or cue box, providing an optimal monitoring environment.

■Features
・ 10 inputs / 8 outputs - 24bit / 96kHz USB 2.0 audio interface
・ 10 mic preamps with XLR connectors and +48V phantom power
・ Up to 24bit / 96kHz
・ 2 1/4 inch Hi-Z device inputs
・ 1/4 inch TRS line output connectors (8OUT)
・ Headphone output connector
・ Output monitoring control available on the front panel
・ Dynamic range: 107dB (a) AD converter
・ Dynamic range: 112dB (a) DA converter
・ Low latency drivers: ASIO 2.0, MME, WDM, DirectSound (compatible with Windows Vista, Windows 7, Windows 8.1 and Windows 10)
・ CoreAudio compatible (compatible with Mac OS X 10.7 and later)
・ Bitwig Studio 8-Track included
・ Size: Approx. 45.0cm x 14.5cm x 4.5cm

Weight: Approx. 2000g

■Specifications
Audio specifications
Maximum 24bit / 96kHz
AD converter
107dB (@ -60dBFS A-Weighted)
20Hz to 20kHz, +/- 0.02dB frequency response
DA converter dynamic range
112dB (@ -60dBFS A-Weighted)
20Hz to 20kHz, +/- 0.02dB frequency response

Terminals
Input terminals:
2 x XLR/TRS combo (for microphones, 48V phantom power support/for guitars, high impedance)
8 x XLR balanced (for microphones, 48V phantom power support)
Output terminals:
8 x TRS balanced (for lines)
2 x TRS balanced (stereo L/R)
1 x headphones

System requirements
Windows:
Windows Vista?10 (ASIO 2.0, MME, WDM, DirectSound)
Mac:
macOS 10.7 or later (CoreAudio compatible)