IMAGENICS / ASE-C21

DMI signals and analog RGB signals can be extended up to 150m using CAT5e/6 cable.

■2 input 1 output CAT5e/6 transmitter
■4K signal format (HDMI input only)
TMDS clock: 25 MHz to 300 MHz
Pixel clock: 25 MHz to 600 MHz
Data rate: 0.75 to 9 Gbps
HDCP: 1.4/2.2
Supported resolutions: 4K60p 4:2:0 24bit, 4K30p 4:4:4 24bit, etc.
■HDMI/DVI input signal:
Supported resolutions: D1 to D5, VGA to UXGA and WUXGA (Reduced Blanking), 4K@60/4:2:0,
Pixel clock rate: 25 MHz to 600 MHz,
TMDS data rate: 0.75 Gbps to 9 Gbps, DeepColor compatible,
HDCP1.4/2.2 compatible, EDID emulator function,
HDMI Type A 19-pin connector x 1 (ARC, HEC Not supported, CEC pass-through)
Input cable compensation function (when using our HDP-HDP series cable)
30m: Signals with TMDS data rates of 6 Gbps or less (such as 1080@60p or VESA resolution)
20m: Signals with TMDS data rates of 9 Gbps or less (such as 4K@60p/4:2:0 or 4K@30p/4:4:4)
■Analog RGB input signal:
0.7V(p-p) 75Ω (1.0V(p-p) when Sync on Green),
Sync signal HD/VD or CS TTL level or Sync on Green,
Supported resolutions VGA to UXGA and WUXGA (Reduced Blanking),
EDID emulator function, Mini Dsub 15 pin connector x 1
■CAT5e/6 output signal:
HDBaseT signal RJ-45 x 1
Transmission distance (CAT5e/6 STP When used)
150m: When transmitting signals in long reach mode with a TMDS clock of 158MHz or less and a TMDS data rate of 4.74Gbps or less.
(1080@60p 24bit, WUXGA@60RB, etc.)
100m: Signals with a TMDS clock of 225MHz or less and a TMDS data rate of 6.75 Gbps or less (1080@60p 36bit, UXGA@60, etc.)
70m: Signals with a TMDS clock of 300MHz or less and a TMDS data rate of 9 Gbps or less (4K@60p/4:2:0, 4K@30p/4:4:4, etc.)
■Audio input:
Linear PCM: 32kHz to 192kHz, 16bit to 24bit, maximum 8 channels,
HDMI Type A 19-pin connector x 1
Analog unbalanced: 245 mV (rms) (-10dBu), 50kΩ or more,
Maximum input level: 2.1V (rms) (+8.7 dBu), 3.5φ mini stereo jack x 1
■Audio output:
Linear PCM: 32kHz to 192kHz, 16bit to 24bit,
Maximum 8 channels, RJ-45 x 1
Analog audio quantization: 48kHz, 24bit
■HDCP for DVI signals: Not supported
■Power supply / power consumption:
AC 90V to AC 250V 50Hz/60Hz /7W (max.)
■SIZE: 100(W)x40(H)x180(D)mm (excluding protrusions) Approx. 680g
■Accessories: 1 3P-3SL power cord (AC 100V, with locking mechanism),
1 3P-2P power conversion plug, 1 HDMI cable retaining bracket (CL-1),
cable tie 1 cable

*For CAT5e/6 cables, please use STP cables

(IMAGENICS cable sold separately recommended) which are less susceptible to electromagnetic waves and static electricity.