ROLAND / RT-MicS　マイク・音源一体型ドラムトリガー

Equipped with 8 practical tones such as snare and hand clap to enhance the live sound. The volume of the tones and built-in mic respectively can be adjusted, and you can also switch to your favorite tone with the dedicated software. Ideal for drummers who want to expand the acoustic drum sound.

■ Drum trigger
■ Sensor + sound source + microphone integrated type
■ Battery drive possible
■ Main specifications
● Number of preloaded tones: 8
● User samples: Maximum number of user samples = 8, sound length = 10 seconds per sample (stereo/monaural)
● File formats that can be imported:
・Windows
WAV (44.1kHz, 16/24 bit)
・Mac OS X
WAV, AIFF, MP3, AAC, Apple Lossless
*A micro USB cable (sold separately) and dedicated software "RT-MicS Wave Sender" are required for importing.
● Display: 7 segment 1 digit (LED)
● Control:
・Top panel
Sound button
・Side panel
MIX/ELEC switch, MIC VOLUME dial, ELECTRONIC VOLUME dial, POWER switch
● Indicator: Trigger indicator ring
● Connection terminals: MIC OUTPUT terminal (standard type), MIX/ELEC OUTPUT terminal (standard type), Micro USB terminal (USB micro B type), DC IN terminal
● Power supply: Alkaline battery (9V type), AC adapter
● Battery life during continuous use: Approx. 2 hours
*Varies depending on battery specifications, capacity and usage.
● Current consumption: 100mA (DC IN)
● Accessories: Instruction manual, "Safety precautions" leaflet, warranty card, Roland user registration card, alkaline battery (9V type), snare protection rubber
*Micro USB cable is not included.
● Sold separately: AC adapter (PSA-100S)
● Installable dimensions:
Height from top of rim to head = max 13mm, thickness of rim = max 12mm, width from inside rim to tip = max 5mm (for inward hoop)
● Outer dimensions / Mass width:
(W) 50 mm Depth (D) 158 mm Height (H) 162 mm Mass 400 g (including batteries)


[Easily add electronic sounds to snare and tom sounds]
RT-MicS, which integrates a drum trigger and a sound module, is preloaded with 8 types of practical tones. In addition to adding effective tones to the back beat, such as hand claps, TR series sounds, and tambourine, you can enhance the usual snare sound by playing snare sounds with emphasized attack.

[You can replace the preloaded tone with the original tone using your computer]
Up to 10 seconds of WAV files can be imported into RT-MicS. By using the dedicated software "RT-MicS Wave Sender", you can import WAV files from a computer via USB, replace the preloaded tones with the original tones, and rename the files.

[Built-in microphone for live sound of snare and tom]
RT-MicS has a built-in microphone to pick up the live sound of snare and toms. By connecting an effector such as a delay or reverb between the RT-MicS's MIC OUTPUT jack and the mixer / amplifier, you can actively create your own sound.

[Equipped with 2 outputs]
The RT-MicS is equipped with a MIC OUTPUT that outputs the built-in microphone sound, an electronic sound only output, or a MIX / ELEC OUTPUT terminal that can be switched between the built-in microphone sound + electronic sound mixed output with a switch. The volume balance of the built-in microphone sound and electronic sound can be easily adjusted with the dial on the side. The electronic sound can be muted by pressing and holding the button on the top of the main unit.

[Compact and easy setup]
Installation of RT-MicS is very easy. It can be attached to and detached from snares of various hoop shapes * without using special tools. The sensitivity of the head sensor that picks up the signal for producing an electronic sound is adjusted with the SENS dial on the side of the main unit. In addition, it is battery-powered and can be set smoothly without the need for a power cord. You can also set it to trigger only when you hit the rim on "RT-MicS Wave Sender". You can use the head to make an acoustic sound, and the rim to make an electronic sound built in the RT-MicS.
* Excluding wood hoops