audio technica / VM750SH

It is equipped with a Shibata stylus developed for 4-channel record playback, which requires high-frequency reproduction capabilities. It excels at reproducing not only high frequencies but also rich mid- and low-frequency sounds.

■Product Features
- Equipped with a Shibata stylus developed for 4-channel record playback, which requires high-frequency reproduction capabilities
- Aluminum tapered pipe cantilever for lightweight construction
- Paratoroidal coil for improved power generation efficiency
- Center shield plate for reduced crosstalk
- Robust die-cast aluminum alloy housing
- Track pressure: 1.8?2.2g (2.0g standard)
- Output voltage: 4.0mV (1kHz, 5cm/sec.)
- Compatible replacement stylus: VMN50SH

■Product Specifications
Type: VM
Frequency Range: 20?27,000Hz
Output Voltage: 4.0mV (1kHz, 5cm/sec.)
Channel Separation: 30dB (1kHz)
Output Balance: 1.0dB (1kHz)
Tracking Pressure: 1.8?2.2g (2.0g standard)
Coil Impedance: 2.7kΩ (1kHz)
DC Resistance : 800Ω
Load Resistance: 47kΩ
Load Capacitance: 100-200pF
Coil Inductance: 460mH (1kHz)
Static Compliance: 40×10-6cm/dyne
Dynamic Compliance: 10×10-6cm/dyne (100Hz)
Stylus: Solid Shibata needle (2.7×0.26mil)
Cantilever: Aluminum tapered pipe
Vertical Tracking Angle: 23°
External Dimensions: H17.3×W17.0×D28.2mm
Weight: 8.0g

■Accessories
- Cartridge mounting screws (5mm x 2, 10mm x 2), washers (2), hex nuts (2),
Non-magnetic screwdriver (1), brush (1), lead wire set (1)