IMAGENICS / CRO-I2SC

This is a converter with a scan converter function that converts IMAGENICS' original IMG.Link signal, which can transmit HDMI (DVI) signals over a single coaxial cable, into SMPTE standard 3G/HD/SD-SDI signals.

■IMG.LINK to 3G/HD/SD-SDI converter
■Input signal: Digital serial signal by original re-encoding method 1 system 1.0 Vp-p 75 Ω BNCx1
Video bit rate after original re-encoding 2.592 Gbps NRZI signal (fixed bit rate, audio is 9.216 Mbps),
Original bidirectional communication link function
Input resolution range
Complies with the specifications of various IMG.LINK transmitters (ex DCE-112TX, CRO-DCE15ATX, DCE-H1TX, CRO-H26T, DCE-S1TX, etc.)

■Output signal: Digital serial output signal compliant with SMPTE 125M, 292M, 424M, 425M standards 1 system 2 distribution 0.8 Vp-p 75 Ω BNCx2
Output format selection (select resolution with rotary switch)
480i59.94 Hz (SD-SDI), 720p59.94 Hz (HD-SDI), 1080i59.94 Hz (HD-SDI), 1080p29.97 Hz (HD-SDI), 1080p30.00 Hz (HD-SDI) 1080p59.94Hz (3G-SDI LEVEL A), 1080p60.00 Hz (3G-SDI LEVEL A)
■Audio input/output: Analog input audio signal -10 dBu (when outputting 1 kΩ or less) High impedance unbalanced 2 channels 1 system (φ3.5 stereo jack)
Embedded audio absolute delay Approximately 1 ms or less
Analog output audio signal -10 dBu (when loaded with 10 kΩ or more) Low impedance unbalanced 2 channels 1 system (φ3.5 stereo jack)
De-embedded audio absolute delay Approximately 43 ms (fixed)
■IMG.Link signal transmission distance: L-7CHD: 210m, L-7CFB: 150m, L-5CFB: 110m, L-5C2V: 60m, L-3CFB: 60m, L-3C2V: 30m
(The distance may be shorter depending on the installation environment, etc.)
■LAN communication function; 10BASET-T, 100BASE-TX (automatic determination) RJ45 1 system
■External control function: You can control the device by sending commands to it via LAN communication to the device or communication function from the IMG.LINK transmitter.
External control of zoom size, crop position, 90-degree rotation function, etc. is possible. It is also possible to send control signals from the IMG.LINK transmitter from the LAN terminal of the device. External control communication is possible even without actual video or audio.
■Other functions: LED display of link status, built-in test pattern and tone generation, on-screen information display, output SDI format change, pseudo-seamless operation selection, aspect conversion (maintenance), etc.
■Power supply: DC 5V 1.2A 6W (max.)
■Accessories: AC 100V 27VA 50Hz/60Hz Domestic AC adapter x 1 (5V 2.3A output with lock)
■SIZE: 100(W) x 25mm(H) x 150mm(D) *Excluding protrusions, weight approx. 550g