OYAIDE / SLP-240S

Simply cut the cable, insert it, and secure the cover to create a high-strength, high-durability, high-performance solderless straight plug.

■Plug for Solderless Cable
■S-Type Plug
■Plug: SLP-240S
■Body: Diamond-Cut Brass
■Plating: Nickel
■Insulator: POM
■Cover: Machined Brass
■Surface Finish: Matte Chrome Plating
■Cover Hole Diameter: 4.2mm
*Please use the dedicated SLD-ZERO cable.

~Manufacturer's Description~

NEO's original solderless plugs, the SLP-240S/L, are unparalleled, combining high performance, strength, and durability thanks to NEO's unique Dual Clawed Locking System (patent pending).

Each part, carefully diamond-cut from a single brass bar, functions flawlessly. Simply thread the cover over the cable and insert it into the body to connect with the center pin terminal. Then, tighten the cover and finish by securing it with two wrenches. This tightens the claw-shaped contacts on the body and the flange, and the two claws bite into the cable's outer sheath, ensuring electrical continuity of the shield.

Furthermore, the threads engraved on the inside of the flange firmly hold the cable, ensuring a strong connection.

[Precautions for Use]

- To reuse the plug, place your fingers on the claws on the body, hold the cable, and gradually spread it apart. Once the cable has been spread apart enough that it can be removed comfortably, pull it out. Because it is a brass part, if you try to spread it apart forcefully, the flange may break, making it impossible to reuse.
- Use the dedicated SLD-ZERO cable.
- Always use two wrenches, and be careful not to hold the L-shaped plug by holding the plug itself.