audio technica / ATW-R3210HH1

This wireless system from Audio-Technica is suitable for a wide range of applications, achieving stable operation and high sound quality. It uses true diversity. The receiver output level is -60 to 0 dB. It can be changed in 2 dB increments. It is equipped with a Group SCAN function that allows you to check the surrounding RF environment.

◆True diversity system for stable operation.
◆Receiver output level can be adjusted from -60 to 0 dB in 2 dB steps.
◆Group SCAN function for checking the surrounding RF environment.
◆IR SYNC for reflecting receiver settings in the transmitter.
◆Can supply antenna power.
◆Two types of output to choose from: XLR and φ6.3 mm mono.
◆OLED display for easy viewing in any environment.

[System Specifications]
Communication frequency band: Band HH1: 806.125 to 809.750MHz (number of frequencies: 30)
Minimum frequency step: 125 kHz
Modulation method: FM
Maximum frequency deviation: ATW-T3201: ±38 kHz (THD: 10%)
ATW-T3202: ±36 kHz (THD: 10%)
Dynamic range: ATW-T3201 (Mic input): 115dB or more, A-weighted, typical
ATW-T3201 (Inst input): 112dB or more, A-weighted, typical
ATW-T3202: 115dB or more, A-weighted, typical
Total harmonic distortion: 1.0% or less (at 1 kHz, ±17.5kHz deviation)
Operating range: 100m (※1)
Frequency response: ATW-T3201: 31 - 15,500Hz (※2)
　　　　　ATW-T3202: 25 - 16,700Hz (※2)
Maximum simultaneous use (recommended): 6 channels
Accessories: Rack mount (long, short), rack mount screw set, whip antenna x 2, AC adapter
※1　Open environment with no interfering signals. 　　※2　Varies depending on the microphone installed.
※2　Varies depending on the microphone installed.

The above specifications are subject to change without notice due to manufacturer reasons such as improvements.

[ATW-R3210]
Reception method: diversity
Image interference ratio: 60dB nominal
Reception sensitivity: 20dBuV (S/N ratio 60dBA) (50Ω termination)
Maximum output level: XLR, balanced, +14dBV
6.3mm, unbalanced, +8dBV
Antenna input: BNC type, 50Ω
Antenna power supply: DC12V, 160mA (A/B combined)
Power supply: AC100-240V 50/60Hz
DC12V 1A (center positive) switching external power supply
Operating temperature range: -5℃ to -45℃
External dimensions: 210.0 x 191.0 x 43.4mm (W x D x H)
Weight: Approximately 1.1 kg