IMAGENICS / DGS-41A

This is a 4-input, 1-output switcher for digital RGB signals (DVI 1.0 standard compliant). In addition to switching via the switch on the front, it also supports external control via parallel, RS-232C, RS-422A, and LAN.

■4 Input, 1 Output DVI Switcher
■Signal Format: TMDS signal (digital RGB), pixel clock 25 MHz to 165 MHz (VGA@60 to WUXGA@60(RB), UXGA@60), 24-bit full color DVI Rev 1.0 compliant signal
■Digital RGB Input: DVI Rev 1.0 compliant, 4 DVI-D 24-pin connectors (single link), Digital RGB Output: DVI Rev 1.0 compliant, 1 DVI-D 24-pin connector (single link)
■Plug and Play: Select from built-in DDC2B EDID data or EDID data from a display connected to the output connector.
Built-in EDID: XGA, SXGA, WXGA, SXGA+, WSXGA+, UXGA, WUXGA(RB), etc.

■External Control: RS-232C compliant (DSub 9-pin male), RS-422A compliant (DSub 9-pin (female), parallel remote (Amphenol 14-pin female), 10BASE-T/100BASE-TX (RJ-45) x 1 system each
■Power Supply: AC 90 V to AC 250 V, 50 Hz/60 Hz
*Power cable must be replaced when using with a power source other than AC 100V
■Weight: Approximately 3.8 kg
■Accessories: EIA-standard rack mount brackets x 1 set (1U), Japan-specific locking power cable (3P-3SL) x 1, 3P-2P power adapter plug x 1, power switch cover x 1
■Size: 422 (W) x 44 (H) x 300 (D) mm (excluding protrusions)