AKG / K1500Y100BTBLUSET

10,000 yen off campaign for a set of 1 K1500 Headphone Up and 1 Y100 WIRELESS Blue Wireless Earphones

※10,000 yen discount campaign when purchasing the high-performance headphone amplifier AKG K1500 and AKG headphones and earphones at the same time!

■ Delicate expression by adopting pure class A operation
Low distortion pure class A operation achieves excellent signal characteristics with a total harmonic distortion rate of less than 0.002%. It outputs delicate and detailed sound. In particular, it matches perfectly with AKG headphones, which feature high resolution and clear sound. In addition, even though it is pure class A, it has sufficient output value, so it can powerfully drive any type of headphones.
■ Input terminals equipped with one analog RCA unbalanced and one XLR balanced system
The input terminal is equipped with an RCA terminal that is used by many players.
In addition, it is equipped with a balanced input (XLR terminal) that reduces noise, so you can enjoy high-quality sound even if you place the K1500 and the player in a distant location. The input can be easily switched with the switch on the back.

■Equipped with both φ3.5mm and φ6.3mm output terminals
The front panel is equipped with an output terminal of φ3.5mm, which is the mainstream headphone plug, and a φ6.3mm terminal that is often used in professional models. It is also possible to connect headphones to two systems and listen to them simultaneously.

■Compatible with headphones with a wide range of impedance from 16Ω to 600Ω
It provides ample driving power for high-impedance headphones developed as professional models, such as AKG professional headphones.

■Type: Pure Class A headphone amplifier
■Input: RCA x 1, XLR x 1 (switchable)
■Output: 3.5mm, φ6.3mm
■Recommended load impedance: 16Ω to 600Ω
■Frequency response: 10Hz to 20kHz
■S/N ratio: 96dB
■Total harmonic distortion: Less than 0.002%
■Rated output: 2.0W (16Ω), 1.1W (32Ω), 0.13W (300Ω)
■Power supply: AC100V 50/60Hz
■Dimensions (W x H x D): 194 x 44 x 135 mm (including volume knob)
■Weight (excluding cable): 1.15kg
■Accessories: Power adapter, RCA-RCA cable

AKG The Y100 wireless earphones are equipped with an ""ambient aware"" function that allows you to adjust the audibility of surrounding sounds, and a ""multi-point"" function that allows you to connect to up to two Bluetooth devices and switch between them. The Bluetooth codec supports SBC/AAC, allowing high-quality wireless playback with compatible audio devices such as smartphones. You can enjoy AKG's high sound quality wirelessly and comfortably.

■ Headphones
■ Type: Dynamic closed type
■ Frequency response: 12-28,000Hz
■ Sensitivity: 114dB SPL/V
■ Impedance: 32Ω
■ Maximum input: 200mW
■ Color: Black
■ Cable length: Approximately 3.0m, OFC (oxygen-free copper) cable
■ Plug: 3.5mm stereo mini (conversion plug included)