IMAGENICS / DVAX-72

This DVI matrix switcher can switch DVI 1.0 compliant digital RGB signals, embedded digital audio signals, and unbalanced stereo audio signals in a full 7-input, 2-output matrix.

DVI Matrix Switcher
Digital Video Input: 7 DVI Rev. 1.0-compliant DVI-D 24-pin connectors (single link)
Digital Video Output: 2 DVI Rev. 1.0-compliant DVI-D 24-pin connectors (single link)
Video Delay: 100 μs or less
Audio Input: -10 dBu, 50 kΩ unbalanced, 2-channel, 7-channel (RCA pin jack)
Audio Input Attenuator: +3 dB, 0 dB, -3 dB, -6 dB selectable for each channel
Audio Output: -10 dBu (10 kΩ or greater load), 150 Ω unbalanced, 2-channel, 2-channel (RCA pin jack)
Audio Frequency Response: 10 Hz to 50 kHz, ±1 dB or less
Audio S/N Ratio: 85 dB or higher
■Audio Crosstalk: 80 dB or higher
■Audio Distortion: 0.008% or less
■Maximum Audio Input Level: +10 dBu (attenuator at 0 dB)
■External Control: RS-232C (D-sub 9-pin male), 10Base-T / 100Base-TX (RJ-45)
■Parallel Remote (Amphenol 50-pin female)
■Operating Temperature and Humidity Range: 0°C to 40°C, 20% RH to 90% RH (non-condensing)
■Storage Temperature and Humidity Range: -20°C to 70°C, 20% RH to 90% RH (non-condensing)
■Power Supply and Power Consumption: AC 90 V to AC 240 V, 50 Hz/60 Hz auto-switching, approximately 35 W
■Size: 422 Dimensions: (W) x 88 (H) x 229 (D) mm (excluding protrusions) 4.5 kg
■Accessories: EIA 19-inch rack mount angle (2U), power switch cover (1), power cable (3P-3SL) for Japan use only with locking mechanism, 3P-2P power adapter
* When inputting an HDCP source, the device connected to the output terminal must also be HDCP-compatible.
* Does not support CEC (Consumer Electronics Control) for HDMI signals.
* De-embedded audio delay adjustment function is not available.