IMAGENICS / HCD-104

This IMAGENICS splitter distributes HDBaseT signals up to four ways. It supports 4K video and can extend up to 150m. Ethernet can communicate between the input and all four outputs. It achieves low latency of up to 10us over a 100m distance.

Supports RS-232C and 100BASE-TX Ethernet overlay, allowing for extension up to 150m. RS-232C allows bidirectional communication with output 1 or simultaneous unidirectional communication with all outputs. Ethernet allows communication between input and all four outputs. Equipped with EDID emulation function (15 built-in resolutions and a copy of the EDID of the device connected to output 1 can be used). Low latency. (Maximum 10 us at 100 m)

■4K Signaling: TMDS Clock: 25 MHz to 300 MHz, Pixel Clock: 25 MHz to 600 MHz, Data Rate: 0.75 to 9 Gbps, HDCP: 1.4/2.2
Supported Resolutions: 4K60p 4:2:0 24-bit, 4K30p 4:4:4 24-bit, etc.
■Cat5e/6 Input Terminal: HDBaseT Signal, RJ-45 x 1
■Cat5e/6 Output Terminal: HDBaseT Signal, RJ-45 x 1, 4-Output
■Transmission Distance: 150 m (492 ft) using CAT-5e/6 STP (Long Reach Mode) with a TMDS clock of 158 MHz or less and a data rate of 4.74 Gbps or less. 1080@60p (24-bit), WUXGA@60p (RB), etc., 100 m: Signals with a TMDS clock of 225 MHz or less and a data rate of 6.75 Gbps or less. 1080@60p (36-bit), UXGA@60p, etc., 70 m: Signals with a TMDS clock of 300 MHz or less and a data rate of 9 Gbps or less. Supports 4K@60p (4:2:0), 1080@60p (48-bit), etc.
■Other Features: EDID emulation function, copies EDID data from 15 built-in types or from the device connected to Output 1 (HDMI mode/DVI mode switchable)
Maintenance terminal
■Power Supply/Power Consumption: AC 100 V (50/60 Hz) / 30 W
■Accessories: 1 x 3P-3SL power cord (AC 100 V, locking mechanism), 1 x 3P-2P power adapter, 1 x set of EIA rack mount brackets
■Dimensions: 422 (W), 44 (H), 250 (D) mm (excluding protrusions), Weight: Approx. 3.2 kg
*CEC is pass-through between input and Output 1; HEC and ARC are not supported.
*For CAT5e/6 cables, please use STP cables (manufacturer-recommended cable, sold separately), which are resistant to electromagnetic waves and static electricity.
*Does not support HDCP for DVI-based signals.
*Using a high-power radio (transceiver) for business or leisure use nearby may cause temporary communication failure (interference), resulting in flickering images, etc.