Camera receiver for evolution G4 500P series. Easy to install on any kind of camera for commercial film production.
Camera receiver for evolution G4 500P series. Easy to install on any type of camera for commercial film production.・High quality sound
・Easy to use and set up
・Transmitter and receiver use infrared wireless synchronization
・Maximum bandwidth 88 MHz, maximum 32 channels
・Maximum reach: up to 100 meters / 330 feet
・Improved RF output power (10/30/50 mW) *B band (In the case of 800 MHz, only 10 mW can be output according to the Radio Law.)
・Maximum operating time 8 hours
■Specifications
Frequency band: 806 - 810 MHz (JB)
Dimensions: Approx. 82 x 64 x 24 mm
Compander system: Sennheiser HDX
Total harmonic distortion (THD + N): ? 0.9 %
Weight: (including battery) approx. 130 g
Audio output: 3.5 mm jack socket: +17 dBu (mono, balanced)
S/N ratio: Line → 110 dBA or more, Phone → approx. 90 dBA
Bandwidth switching: up to 88 MHz
Peak deviation: ±48 kHz
Nominal deviation: ±24 kHz
Operating time: approx. 8 hours
Modulation method: wideband FM
Power supply: 2 AA batteries (1.5 V) or BA 2015 accupack
Current consumption At nominal voltage: typically 140 mA, with receiver switched off: less than 25 μA
Adjacent channel rejection: typically more than 65 dB
Intermodulation attenuation: typically more than 65 dB
Power supply: 3 V battery / 2.4 V rechargeable battery
Receiving frequency: up to 3520 receiving frequencies, adjustable in 25 kHz steps, 20 frequency banks, each bank with up to 32 factory preset channels, no intermodulation, 6 frequency banks, up to 32 programmable channels
RF sensitivity: less than 1.6 μV at 52 dBA eff S/N
Squelch: low frequency: 5 dBμV, mid frequency: 15 dBμV, high frequency: 25 dBμV
Operating temperature range: -10 °C - +55 °C
Receiving principle: diversity method
Blocking: 70 dB
商品レビューProduct Review
すべてのレビューを見る