MOOG / MODELDWALNUT

The Minimiig Model D walnut finish is now available in limited production!

■Analog Synthesizer
■MOOG Minimoog Model D Walnut Limited
■Limited Model

Sound Source
■3 Oscillators
■Noise Generator
■External Audio Input

Oscillator
■Frequency Range: 0.1Hz - 20kHz (6-step range switching)
■Oscillator Stability (Short-term): 0.25% or better
■Waveforms: Triangle, Triangle/Sawtooth (Oscillator 1, Oscillator 2), Inverted Sawtooth (Oscillator 3), Sawtooth, Square (Rectangular), Pulse (Wide) Pulse wave (narrow)
■Noise generator
■White
■Pink

LFO
■Period: 0.05Hz - 200Hz
■Waveform: Triangle wave (knob down), Square wave (knob up)

External audio input
■Input level: +10mV - +2V
■Input impedance: 1MΩ

Filter
■Type: Voltage-controlled low pass (Moog ladder filter)
■Cutoff frequency range: 10Hz - 20kHz
■Filter slope: 24dB/oct.
■Filter resonance: at cutoff frequency
■Contour Generator
■Attack Time: 1ms-10s
■Decay Time: 4ms-35s+
■Sustain Level: 0-100% (Maximum Output)
■Filter Contour Width: 0-4 Octaves
■Voltage Controlled Amplifier (VCA)
■Loudness Contour Dynamic Range: 80dB

Audio Input Level
■Connector: 6.35mm (Standard Phone Jack) Input
■Input Voltage: +10mV (Min), +10V (Max)
■Input Impedance (Rated): 1000kΩ

Audio Output Level
■High Level Output
■Output Voltage (Rated): 0.5V
■Output Voltage (Max): 4.2V (Peak-to-Peak)
■Output Impedance (Rated): 3kΩ
■Low Level Output (High (30dB below the standard level)
■Output Voltage (Rated): 15mV
■Output Impedance (Rated): 1kΩ
■Headphone Output (Stereo)
■Output Voltage (Maximum): 0.3V
■Output Impedance: 8Ω

Keyboard
■Key Action: Synthesizer (Spring)
■Number of Keys: 44
■Key Range: F0-C4
■Keyboard Priority: Selectable (Low, High, Last)
Internal Connections:
Oscillator 1 (Pitch)
Oscillator 2 (Pitch)
Filter Contour (Trigger)
Loudness Contour (Trigger)
Internal Switch Connections:
Oscillator 3 (Pitch)
Filter (Keyboard Tracking 1/3)
Filter (Keyboard Tracking 2/3)

■Rated Voltage: 0.5V
■Maximum voltage: 4.2V (peak-to-peak)
■Output impedance (rated): 3kΩ
■Glide rate (octave): 1ms to 10s
■Pitch bend range: ±5 semitones (minimum)
■Control voltage (CV) output
■Afterpressure (aftertouch) jack: 6.35mm standard phone jack
■Output voltage: 0 to +5V, with trim
■Pitch jack: 6.35mm standard phone jack
■Output voltage: -3V to +7V, C=0V
■Gate jack: 6.35mm standard phone jack
■Output voltage: 0 to +5V
■Velocity jack: 6.35mm standard phone jack
■Output voltage: 0 to +5V or 0 to +10V (selectable), with trim
■Control voltage (CV) input
■Loudness jack: 6.35mm TRS
■ Input Voltage: 0 to +5V, +5V = unity gain
■ Can be controlled with a Moog EP-3 expression pedal (ring)
■ Filter (Cutoff Frequency) Jack: 6.35mm TRS
■ 1V/1 octave
■ Can be controlled with a Moog EP-3 expression pedal (ring)
■ Oscillator (Pitch) Jack: 6.35mm TRS
■ 1V/1 octave
■ Can be controlled with a Moog EP-3 expression pedal (ring)
■ Modulation Source Jack: 6.35mm TRS
■Ring = Noise Send, Tip = Modulation Receive
(Internal connection when nothing is connected to this jack)
■Trigger Jack: 6.35mm standard phone jack
+5V input triggers the filter and loudness contour generator

■MIDI Connector (5-pin DIN connector)
■MIDI IN: Note-on (trigger), note number
■MIDI OUT: Note-on (trigger), note number (pitch CV), velocity, aftertouch
■MIDI THRU: Mirrors the signal from MIDI IN
■Power Supply
■Self-switching external power supply: 100-240V AC, 50/60Hz
■Power Consumption: Less than 12W
■Connector: Locking XLR4
■Dimensions and Weight
727 (W) x 435 (D) x 146 (H) mm (panel horizontal), 14.5 kg