3 Monkeys Solderless / 14PEDALBOARDPATCH

The 3 Monkeys Solderless / 1/4"" Pedalboard Patch Cable Kit is a simple, compact, and easy-to-use solderless patch cable kit that uses original plug designs. Its amazing design means no soldering is required, and there's no need to strip the cable's insulation or tighten any screws! This kit includes a 3m cable and a set of 10 plugs that can be used both straight and L-shaped, making it easy to build your own.

■Patch Cable Kit
■Contents
- 3m cable
- 10 straight/L-shaped compatible plugs
■Features
- No wire stripping required
- No screw fastening required
- Easy assembly: simply screw the cable into the plug
- 16AWG, 19-strand center core cable
- Low capacitance cable (28-30pF/foot)
- DC cables can also be made using a separately sold DC plug
- Compatible with both straight and L-shaped cables
■How to assemble
1. Cut the cable to the desired length. Make sure the cut is as straight as possible. 3 Monkeys uses a knife. First, use the included cable cut as a reference.
2. Screw the cable into the plug. Twist it in a few times, like tightening a bolt, until it is fully inserted. There is no need to tighten it too much.
3. Repeat on the other side.
4. Check that the cable is conducting electricity.
■Troubleshooting
- Cable is not conducting electricity: Check that the plug is firmly inserted into the cable.
・If power still does not flow, try unplugging the cable, cutting it again, and remaking it.

*If you have any leftover cable, it will not go to waste. You can also create additional patch cables by using a single 1/4"" Solderless Audio Plug.
What's more, if you use the separately sold 2.1mm DC Solderless Plug, you can use the same cable to create a DC cable.
If you have any leftover plugs, don't worry. You can create even more cables by using the separately sold Solderless Cable.