TASCAM / ML-32D

A 1U size compact converter that converts 32-channel analog line input / output signals to Dante. Also supports redundant Dante Primary / Secondary. Equipped with D-sub terminal for analog line input / output. An analog / Dante converter that is useful in a variety of applications.

■ Specifications
Number of channels: 32 line input / 32 line output
·Digital
Sampling rate: 44.1k / 48k / 88.2k / 96k Hz
Bit rate: 16bit / 24bit

■ Analog input / output
・ Line input:
Connector: D-sub 25pin female
Connector: Inch type No.4-40 UNC
Pin assignment: compliant with AES59-2012 TASCAM pin assignment
Nominal input level: + 4dBu, + 6dBu (only when maximum input level is + 15dBu)
Maximum input level: + 24dBu, + 22dBu, + 20dBu, + 18dBu, + 15dBu (depending on the setting of the REF. LEVEL selector switch)
Input impedance: 10kΩ or more
・ Line output
Connector: D-sub 25pin female
Connector: Inch type No.4-40 UNC
Pin assignment: compliant with AES59-2012 TASCAM pin assignment
Output impedance: 200Ω or less
Compatible load impedance: 2 kΩ or more
Nominal output level: + 4dBu, + 6dBu (only when maximum output level is + 15dBu)
Maximum output level: + 24dBu, + 22dBu, + 20dBu, + 18dBu, + 15dBu (depending on the setting of the REF. LEVEL selector switch)
・ Digital input / output
Connector: RJ-45 x 2
Transmission protocol: Dante
Gigabit Ethernet standard: 1000BASE-T (IEEE 802.3ab)
Cable: Category 5e or higher STP cable
Power supply: AC100V, 50 / 60Hz
Power consumption: 22W
Dimensions: 483 (W) x 45 (H) x 303.8 (D) mm
Weight: 3.5kg
Operating temperature: 0-40? C
Accessories: Power cord, rack mount screw kit, instruction manual (with warranty)