TASCAM / ML-32D

The TASCAM/ML-32D is a compact, 1U converter that converts 32-channel analog line input/output signals to Dante. Dante also supports redundancy (Primary/Secondary). Analog line input and output come standard with D-sub connectors. This analog/Dante converter is useful for a wide range of applications.

■Specifications
Number of Channels: 32 Line Inputs / 32 Line Outputs
・Digital
Sampling Rate: 44.1k/48k/88.2k/96k Hz
Bit Depth: 16-bit/24-bit

■Analog Inputs/Outputs
・Line Input:
Connector: D-sub 25-pin Female
Connector: Inch Type No. 4-40 UNC
Pin Assignment: AES59-2012 Compliant TASCAM Pin Assignment
Nominal Input Level: +4dBu, +6dBu (Only when Maximum Input Level is +15dBu)
Maximum Input Level: +24dBu, +22dBu, +20dBu, +18dBu, +15dBu (Depending on REF. LEVEL Switch Setting)
Input Impedance: 10kΩ or greater
・Line Output
Connector: D-sub 25-pin Female
Connector: Inch Type No. 4-40 UNC
Pin Assignment: AES59-2012 compliant TASCAM pin assignment
Output Impedance: 200Ω or less
Compatible Load Impedance: 2kΩ or more
Nominal Output Level: +4dBu, +6dBu (only when the maximum output level is +15dBu)
Maximum Output Level: +24dBu, +22dBu, +20dBu, +18dBu, +15dBu (depending on the REF. LEVEL switch setting)
Digital Input/Output
Connector: RJ-45 x 2
Transmission Protocol: Dante
Gigabit Ethernet Standard: 1000BASE-T (IEEE 802.3ab)
Cable: Category 5e or higher STP cable
Power Supply: AC 100V, 50/60Hz
Power Consumption: 22W
Dimensions: 483(W) x 45(H) x 303.8(D)mm
Weight: 3.5kg
Operating Temperature: 0-40°C
Accessories: Power cord, rack mount screw kit, instruction manual (with warranty)

*Dante is a transmission protocol developed by Audinate. It enables multi-channel transmission (512ch IN/512ch OUT) and high-precision clock synchronization on Gigabit Ethernet-based networks.
For more information on Dante, please visit the Audinate website.
https://www.audinate.com/