JBL / CSMA 240

The CSMA240 is a power amplifier with 8-channel mixer functionality. It features microphone/line input terminals that allow for signal level switching and 27V phantom power supply, as well as a line input terminal for direct connection of CD players, etc. It supports high-impedance connections and also includes a high-pass filter function to prevent speaker transformer saturation.

An all-in-one power amplifier with a built-in mixer that makes it easy to set up a broadcast system. Packed with features in a compact chassis, it allows you to build a broadcast system simply by connecting microphones and speakers. Furthermore, because it requires minimal operation, high-quality sound reinforcement (SR) can be achieved even in locations without a dedicated operator, such as stores, various facilities, and workspaces.


■Power Amplifier

■Input Channels: 8

■Output Channels: 2

■Input

Terminals: ch1/5: Euroblock (balanced), ch2-4/6-8: Euroblock (balanced), RCA (unbalanced)

Impedance: Euroblock: 400Ω (microphone), 20kΩ (line), RCA: 50kΩ

Maximum Input Level: +20dBu

Phantom Power: (Euroblock only)

■Output

Terminals: Euroblock

4/8Ω: 40W + 40W

70/100V: 40W + 40W

■Frequency Response: ±2dB (20Hz-20kHz, 4/8Ω output)

■S/N Ratio: 90dB or higher (A-weighted)

■THD: 0.5% or less (20Hz-20kHz, power amplifier output)

■Indicators: Signal (input/output), Clip (output), Power

■Power Supply: AC100V, 50/60Hz

■Power Consumption: 35W (1/8 output, pink noise, 4Ω)

■Dimensions (W×H×D): 437×44×304mm (excluding protrusions)

■Weight: 4.9kg

■Accessories

3-pin Euroblock connector ×8

5-pin Euroblock connector ×4

Front angle bracket ×2

Rear angle bracket ×2

Rear flat bracket ×2

Mounting screws ×12

Rear bracket connection screws ×3

Spring washer ×3

Washer ×3

Rack mount screws ×10

Rubber feet ×4 (1 sheet)

Power cord

Japanese instruction manual