audio technica / ATM350PL

This compact condenser microphone is ideal for capturing piano and other musical instruments. It comes with a long gooseneck mount with a powerful magnetic closure that can be attached to metal surfaces, allowing for flexible setup. It also features a low-cut switch to reduce noise, delivering clear sound with high sound pressure levels and minimal distortion.

■Uses a strong magnetic magnet, allowing it to be firmly fixed to metal surfaces inside the piano.
■The bottom is made of a material that is less likely to scratch the contact surface.
■High input resistance design with a maximum sound pressure level of 159dB.
■Delivers crisp, clear, and balanced response even at high sound pressure levels.
■Equipped with a low-cut switch to reduce background noise (*).
■Unidirectional characteristics isolate unwanted sounds from the rear and sides.
■Accurately captures the desired sound source and achieves a high margin against feedback.
■Can be converted to hypercardioid or omnidirectional with an optional replacement unit.

Product Specifications
■Type: Back electret condenser
■Polar pattern: Cardioid
■Frequency response: 40-20,000 Hz
■Low cutoff: 80 Hz, 12 dB/octave
■Sensitivity: -49 dB (3.5 mV) (0 dB = 1 V/Pa, 1 kHz)
■Output impedance: 200 Ω
■Maximum input sound pressure level: 159 dB SPL (1 kHz THD 1%)
■Dynamic range: 130 dB (1 kHz at Max SPL)
■Signal-to-noise ratio: 65 dB (1 kHz at 1 Pa, A-weighted)
■Phantom power: 11 V-52 V DC, 3.5 mA
■Switch: Flat, low cut
■Weight: Microphone: 14.5 g, Power module: 90 g
■Dimensions: Microphone Unit: 37.8mm Length, 12.2mm Diameter
■Power Module: 92mm Length, 18.9mm Diameter
■Output Connector: Power Module: 3-Pin XLR-M Type
■Cord: 4.0m Length (Fixed to Microphone Unit), 3.2mm Diameter, HIROSE HR10 Type Connector
*Installed in Power Module AT8543
■Accessories: Gooseneck/Long AT8490L, Piano Mount AT8491P, Power Module AT8543, Violin Mount AT8468, Hard Case