MONTREUX / 9453

MONTREUX '52 Telecaster Pickguard, Black, Relic

■52 Telecaster Pickguard
■Current Fender USA Style
■Black/Relic
■Dimensions
・Thickness: Approximately 1.8mm
*These are actual measurements taken by our company, not the manufacturer's published value. Also, since these measurements are taken from the packaging, please use them for reference only.

~From the manufacturer's website~
This is a black Bakelite pickguard. While the current Fender USA model is used as a template, it will also generally fit Fender Japan models. Screws are included.

*Images are for illustrative purposes only. Relic finishes vary from guitar to guitar.
*Even for compatible models, relic finishes may be required depending on the condition of the guitar.

-----------------------------------
[Caution]
・A protective film may be attached to the surface of the pickguard.
・The film may not peel off easily. If this occurs, use a hair dryer to warm the surface while peeling off the film.
・If adhesive remains on the surface after removing the film, you can remove it with alcohol, an eraser, or hand cream.
-----------------------------------