JBL / CBT 200LA-1-WH

The CBT 200LA-1 WH is a column speaker from JBL. This slim model can be installed anywhere. It features 32 high-output drivers arranged vertically, covering a wide area with a single speaker. JBL's unique CBT technology delivers clear sound throughout the entire area. It features a 70/100V transformer for high-impedance connections. It's available in white.

This long model features 32 50mm drivers.

This long model features 32 50mm drivers using neodymium magnets. A single driver can cover a wide area.

Our unique CBT technology delivers clear speech and announcements throughout the entire coverage area.

The vertical dispersion angle can be set to 15° (Narrow) or 30° (Broad) for each module. The APG mode, which sets the upper section to Narrow and the lower section to Broad, increases the sound pressure level in the distance and reduces sound pressure differences over distance.


Equipped with a Music/Speech switch that adjusts the sensitivity of the mid-range.


Equipped with a 70/100V transformer that allows for high-impedance connections.


Includes a wall mounting bracket with adjustable angle up, down, left, and right.

Frequency Range (-10dB): 80Hz - 20kHz
Directional Angle:
Horizontal: 150°
Vertical (switchable): Narrow: 15°, Broad: 30°, APG: 22°
Power Rating: 650W
Maximum Sound Pressure: Narrow: 123dB SPL (Speech mode), 120dB SPL (Music mode)
Broad: 121dB SPL (Speech mode), 118dB SPL (Music mode)
APG (on-axis): 122dB SPL (Speech mode), 119dB SPL (Music mode)
Driver Configuration: 50mm full-range drivers x 32
Sensitivity (1W, 1m): Narrow: 95dB SPL (Speech mode), 92dB SPL (Music mode) Broad: 93dB SPL (Speech mode), 90dB SPL (Music mode)

APG (on-axis): 94dB SPL (Speech mode), 91dB SPL (Music mode)

Nominal Impedance: 4Ω *2

Transformer Tap
100V: 240W/120W/60W *3

70V: 240W/120W/60W/30W *3

Input Terminal: Screw terminal

Finish: ABS resin, black

Dimensions (W x H x D): 99 x 2,000 x 153mm (excluding protrusions)

Weight: 15kg

Accessories: Wall mounting bracket, connecting bracket

*1: IEC pink noise, crest factor 6dB, 2 hours
*2: When the upper and lower modules are connected in parallel. 8Ω for a single module
*3 Total value set for both upper and lower modules