IMAGENICS / CRODCE15ARX

CRO-DCE15ATX と組み合わせる事により、DVI(HDMI)信号を同軸ケーブル1 本で最長210m 伝送可能な同軸延長器

■DVI Signal Coaxial Extender/Receiver IMG.Link Compatible
■Input Signal: 1 digital serial signal using the original re-encoding method

1.0 Vp-p 75 Ω BNC x 1

Bit rate after original re-encoding

Original bidirectional communication link function
■Active Through Output: 1 digital serial signal using the original re-encoding method, 1.0 Vp-p 75 Ω BNC x 1

Input IMG.LINK signal is re-clocked and then re-output
■Output Signal: TMDS signal (digital RGB) pixel clock 25 MHz to 165 MHz

Automatically supports VGA@60 to UXGA@60, WUXGA@60 (RB), and 2048x1152 (RB) PC signals, as well as D1 to D5 equivalent HDMI signals

24-bit full color DVI Rev. 1.0 standard compliant signals or HDMI signals
DVI-D One 24-pin connector (single link) (HDCP compatible, HDMI signal output possible)
Output DVI cable length is typically up to 5m when using a Panasonic DVI cable at maximum resolution (depending on display performance)
■Analog Audio Output
Analog output audio signal: -10 dBu (10 kΩ or more load), low impedance, unbalanced, 2-channel, 1-channel (φ3.5 stereo jack)
Audio frequency response: -1 dB to +1 dB at 20 Hz to 20 kHz
Audio S/N ratio: 85 dB or more (A-weighted at 1 kHz)
Audio crosstalk: 80 dB or more
Audio distortion: 0.03% or less
Maximum audio output level: +10 dBu (HDMI embedded audio input at 0 dBFS)
Audio sampling: 24-bit 48 kHz linear PCM System
■HDCP Standard: Supports HDCP on HDMI and HDCP on DVI
■RS-232C: RS-232C compliant, full duplex, switchable between 9,600 bps and 38,400 bps

Switchable between non-flow (default) and RTS/CTS hard flow

D-SUB9 (male) x 1
■Coaxial Transmission Distance: L-7CHD: 210m, L-5CFB: 110m, L-5C2V: 60m, L-3CFB: 60m, L-3C2V: 30m
(Distance may be shorter depending on the installation environment.)

Other Features:

DVI to HDMI signal conversion

LEDs for input signal status, HDCP status, and link status

Anti-pathological signal processing for stable NRZI serial communications

■Power Supply: DC 5V 1.0A
■Size: Width 100 Dimensions: 25 mm x 25 mm (H) x 150 mm (D) (excluding protrusions)
Accessories: 1 x AC 100 V 27 VA 50 Hz/60 Hz AC adapter (5 V 2.3 A output) for use in Japan
1 x DVI-D24 (male) to HDMI (female) conversion connector
*Not compatible with HDMI CEC and ARC functions
*Note: We recommend using only IMAGENICS DVI/HDMI-related devices and cables. Mixing products from other companies (including overseas manufacturers) may result in performance issues and unexpected malfunctions. In such cases, we cannot guarantee the operation of our products.