KORG / DS-DAC-10R

This USB-DAC supports both recording and playback in DSD 5.6MHz and 2.8MHz, and PCM up to 192kHz/24bit. It also has a phono input terminal for direct connection to a record player.

■ Achieve DSD recording with just the DS-DAC-10R and AudioGate 4.

・Supports DSD formats of 5.6MHz and 2.8MHz for both recording and playback, and PCM formats up to 192kHz/24-bit.

■ Equipped with a phono input terminal for direct connection to a record player.

・Equipped with a phono input terminal and ground terminal for direct connection to a record player. Records can be converted directly into high-resolution data with high-quality DSD sound, and songs can be managed in AudioGate. The input terminal also supports line-level input.

■ Built-in DSD phono equalizer.

・Supports five different curves in addition to the standard RIAA, allowing you to apply the equalizer during recording, or to apply it post-record to the original sound of the record.

■ Carefully selected parts are used to achieve the highest sound quality.

・Uses a PCM4202 (TI) AD converter. The phono amplifier's pre-stage circuit uses high-performance parts such as the OPA1662 (manufactured by TI) and thin-film polymer multilayer capacitors (PMLCAP/manufactured by Rubycon) to fully utilize the performance of the phono cartridge. The DA converter is the same CS4398 (manufactured by Cirrus Logic) used in the MR-2000S and DS-DAC series. It faithfully reproduces the original sound without coloring it.
■ Supports ""DSD native playback"" of 2.8224MHz and 5.6448MHz DSD files.

◇Audio Interface
■Number of Channels: 2
■Input Format (USB): DSD: 2.8224MHz / 5.6448MHz, 1-bit, PCM: 44.1kHz / 48kHz / 88.2kHz / 96kHz / 176.4kHz / 192kHz, 16-bit / 24-bit
■Host Interface: USB 2.0 (High Speed)
■Audio Driver: ASIO 2.1, WDM, Core Audio
◇Major Standards
■Frequency Response: 10Hz - 20kHz ±1dB (fs=44.1kHz / 48kHz), 10Hz - 40kHz ±1dB
■S/N Ratio: 105dB (TYP.) 20Hz - 20kHz, IHF-A
■THD+N Ratio: 0.005% (TYP.) 20Hz - 20kHz
◇LINE OUT L/R
■Type: RCA pin jack (unbalanced)
■Load impedance: 10kΩ or greater
■Nominal/Maximum level: -6dBV / +6dBV
◇PHONES
■Type: φ6.3mm stereo phone jack
■Load impedance: 16Ω or greater
■Maximum output: 70mW + 70MW @ 32Ω
◇LINE IN, PHONO L/R
■Type: RCA pin jack
■Input impedance: 47kΩ (LINE) / 50kΩ (PHONO)
■Nominal level: -6dBV (LINE) / 5mVrms (PHONO)
■Maximum level: +6dBV (LINE) / 100mVrms (PHONO)
◇USB (Device)
■Type: Type B
◇General
■Indicator: Ring LED indicator (color indicates sampling frequency and recording status)
■Power Supply: USB bus power (5V 500mA)
■Power Consumption: Max. 2.5W
■Dimensions: 155 (W) x 184 (D) x 49 (H) mm (including protrusions)
■Weight: 1.1 kg
■Accessories: USB cable