TASCAM / DR-10CH

The TASCAM DR-10CH is an audio recorder that connects between the microphone and transmitter of a wireless microphone system. Simply connect the microphone to the DR-10C series unit and then connect it to the transmitter using the included cable. This wearable micro linear PCM recorder can record audio using a pin microphone.

■Portable Digital Recorder
■Compatible with Shure wireless system microphones/transmitters
■Compatible with Sony/RAMSA wireless system microphones/transmitters (requires optional panel AK-DR10CR)
*Support for Sony/RAMSA products is achieved by switching the setting using a slide switch
■24-bit/48kHz linear PCM mono recording
■Recording format: WAV files (recording in BWF format)
■Uses microSD/microSDHC cards as recording media (microSDHC cards up to 32GB can be used)
■Slide-type recording switch prevents accidental operation during recording, and a function disabling all operations except for recording stop during recording
■Dual recording function allows simultaneous recording of two channels at different levels
■Automatic file closing to prevent data loss before the battery runs out
■LOW/MID/HIGH Three-level recording level settings
■Low-cut filter (120Hz)
■Limiter function automatically adjusts for excessive input levels
■Auto-level function automatically adjusts recording levels
■Built-in clock function adds time information to files, supporting the BWF format for convenient editing and searching
■Time track increment function automatically updates files at set recording times (approximately 15 minutes)
■Playback function allows instant confirmation of recorded data
■3.5mm (1/8"") stereo mini headphone output jack
■Wide viewing angle, highly visible OLED display
■Micro USB for easy data transfer to a computer via USB 2.0 B terminal
■More than 10 hours of recording time with a single AAA battery *When using alkaline batteries (EVOLTA)
■DR-10C Series settings can be created and transferred as a text file on a computer
■Settings can be transferred between DR-10C Series devices via infrared communication
■Firmware updates possible using a microSD card
■Includes a clip for attaching the unit to a belt
■Includes a silicone rubber band for securing the transmitter and unit
■Includes a dedicated case for storing the unit and accessories

■Specifications
・Recording Media: microSD card (64MB-2GB), microSDHC card (4GB-32GB)
・Sampling Frequency/Bit Depth: 48kHz/24-bit
・Analog Audio Input: 4-pin mini XLR (compatible with SHURE products)
・PHONES: 3.5mm (1/8"") stereo mini jack (DUAL MONO)
・One AAA battery Powered by alkaline, nickel-metal hydride, or lithium batteries; USB bus power from a computer

Dimensions: 52 (W) x 55.6 (H) x 24.4 (D) mm

Weight: 63 g (including batteries), 51 g (excluding batteries)

Accessories: Transmitter cable, USB cable, belt clip, silicone rubber strap, storage case, instruction manual (with warranty)