FURMAN / M-8S Power Sequencer

The FURMAN MeritX series, a standard power module, is a reasonably priced power conditioner equipped with the basic functions required for a power environment.

~From the manufacturer's website~
The M-8S is a power sequencer that offers superior functionality at an affordable price. The rear panel features eight outlets. Six of these are divided into three groups, each capable of sequentially powering on/off (ON: DELAY 1 → 3, OFF: 3 → 1). The remaining two outlets on the rear and one on the front are unrelated to the sequence.

This unit can be controlled remotely by connecting a separately sold remote controller to the rear terminal block. The terminal block's operation can be configured with DIP switches, allowing it to be controlled from other devices depending on the application.

The sequence interval can be set between 0.5 and 10 seconds by adjusting the rear trimmer.

■Features
- AC protection & power filter
- Six sequenced outlets (3 groups) and two unswitched outlets on the rear, one unswitched outlet on the front
- Rear terminal block accepts either momentary or alternate controllers
- All settings can be configured on the rear panel
- Maximum supply current: 15A

■Maximum supply current: 15 amps, 100 VAC (circuit breaker)
■Power cord: 14AWG x 3, 3m, black, fixed, NEMA 5-15P plug
■Output outlets (NEMA 15-5R)
■Front panel: 1 unswitched
■Rear panel: 2 unswitched, 6 sequenced (2 pairs x 3)
■Surge protection circuit: Merit series standard
■Spike protection mode: Line to neutral
■Maximum continuous operating voltage: 130V RMS
■Maximum Clamping Voltage: 500 Volts Peak
■Peak Impulse Current: 12,000 Amps
■Energy Rating: 225 Joules
■AC Filter: Standard π-type LCR filter
■Noise Attenuation: >26dB, 100 kHz to 1 MHz
■Operating Temperature Range: 5°C to 40°C
■Operating Humidity: <90% rH (Relative Humidity)
■Power Switch: Front Panel (ON/OFF)
■Circuit Breaker: Front Panel, Press to Reset
■Front Panel Indicators: Delay 1, Delay 2, Delay 3, Power, Protection OK
■Rear Panel DIP Switches: 12V Mode On/Off, GND Mode On, Momentary/Maintained
■Trim Control: Rear Panel, for Sequence Time Setting
■Remote Terminal Voltage: +5-30VDC In 12VDC (12mA) Out
■Remote Terminal Type: Phoenix-type 4-Pin Terminal, Screw Type, +12V, STAT, REM, GND (Class 2 Wiring)
■Dimensions: 483W x 44H x 222D mm, 1U rack size
■Weight: 3.2kg
■Power Consumption: 5 Watts
■Safety Standards: C/CSA/US
*3-pin to 2-pin adapter sold separately.