FURMAN / CN-1800S Power Sequencer

Variations

Highly functional and easy-to-use power sequencer. Compatible with large-scale systems, it is equipped with power distribution, noise filtering, and protection functions.

■Power Sequencer
■Smart Sequence
■Protects equipment from lightning surges: SMP
■Protects equipment from abnormal voltages: EVS
■Removes power noise: LiFT
■Remote Access

■Maximum AC Current Capacity: 15A, 100VAC (with thermal breaker)
■AC Cable: 3/14AWG, 10 feet (approximately 3m), black, fixed, with NEMA 5-15P plug
■AC Connectors:
Front Panel Output x 1, Unswitched NEMA 5-15R
Rear Panel Output: Unswitched NEMA 5-15R x 2 (1 pair)
Delay Output: NEMA 5-15R x 6 (3 pairs, controlled by individual relays)
■Surge and Under/Overvoltage Protection:

AC Surge Protection: SMP

Spike Protection Mode: Line to Neutral, Zero Ground Leakage Spike Clamping Voltage: 188VAC, Peak @ 6,000V/3,000A

Response Time: 1ns

Maximum Surge Current: 6,500A

AC Undervoltage Protection: EVS, 77VAC+/-3VAC

AC Overvoltage Protection: EVS, 145VAC+/-5VAC

EVS Reset Mode: Manual or Auto Reset (Selectable)

■AC Filter

LiFT

Noise Attenuation: Linear, 10dB @ 10kHz, 40dB @ 100kHz, 50dB @ 500kHz

Operating Temperature Range: 5 to 40°C
Operating Humidity Range: 90% Relative Humidity or Less
■User Interface

Key Switch: Front Panel, 3-Position Switch (ON, OFF, REMOTE)

Key: Included, 1 Set

Push Button Switch: Front Panel, Protected by Security Cover Thermal Circuit Breaker: Front panel, push button

Front Panel Status Indicators: Primary Link, Secondary Link, Ethernet, Delay 1, Delay 2, Delay 3, Power, Protection OK, EVS

DIP Switches: Front panel, protected by security cover, 1 minute delay, 2 minute delay, 4 minute delay, Force Shutdown NO/NC, 12V Mode ON/OFF, GND Mode ON, Momentary/Alternate, Primary/Secondary, EVS Reset AUTO/MANUAL

Potentiometer: Front panel, delay time fine adjustment, protected by security cover

■Control/Status/Triggering (Rear Panel)
Remote Terminal: +5 to 30V DC input, 12VDC (12mA) output
Smart Sequence: Phoenix-type 4-pin terminal block with screw terminals, primary and secondary links (current loop: 1,000 feet rated)
Remote Terminal: Phoenix-type 4-pin terminal block with screw terminals, +12V, STAT, REM, GND (Class 2 wiring)
Force Termination/Delay 3 Terminal: Phoenix-type 5-pin terminal block with screw terminals, Force Termination, Delay 3 (Class 2 wiring)
RS-232 Compatibility: DE-9 terminal block
Voltmeter: Available with RS-232 or other option, ±1VAC tolerance
Ammeter: Available with RS-232 or other option, ±0.3A tolerance
Power Consumption (No Load): 10W
Safety Standards: NRTL-C, CSA/NRTL Compliant
Dimensions: 483W x 44H x 267D mm
■Weight: 5.5 kg

*Specifications are subject to change due to product improvements.
*3-pin to 2-pin adapter sold separately.