CLEAR-COM / RS-702

This 2-channel beltpack station features a 6-pin intercom line, enabling dual listen and talk. It also comes equipped with a DIP switch for configuring headset output, talk latch, on/off, and other settings, allowing you to customize the functionality to suit your needs.

[直輸入品][Direct Import]

■ 2-channel belt pack with 6-pin connector
■ Simple and functional design
■ Belt clip can be rotated 90 degrees
■ Some functions can be customized using DIP switches

[General]
・Operating voltage: 12V-30V
・Operating temperature: 0°-70°
・Current consumption: ~13mA (all inputs off)
・Dimensions (excluding protrusions): 114.3(W) x 86.4(H) x 43.2(D)mm
・Weight: 0.31kg
[Microphone Preamp]
・Frequency response: 280Hz-15kHz ±3dB
・Distortion: <0.1%
・S/N ratio: >65dB
[Headphone Amplifier]
・Frequency response: 150-20kHz ±3dB
・Distortion: <0.5%
・S/N Ratio: >50dB
Crosstalk: >80dB
Sidetone Signal: >45dB (-80dB mic input)
[Connectors]
Intercom Line: 1 x 6-pin XLR male, 1 x 6-pin XLR female
Headset: 1 x 4-pin XLR male
[DIP Switches]
1) Microphone Type: ON = Dynamic (default), OFF = Electric
2) Headset Output: ON = High (default), OFF = Low
Note: While the manufacturer defaults to Low, the default setting for domestic shipments is High.
3) Minimum Volume Setting (Ach): ON = Mute at min level (default), OFF = Not silent at min level
4) LED Setting: ON = LED normal operation (default), OFF = All LEDs dark
5) Call on Talk Setting (Ach): ON = Call occurs operation, OFF = No call when talk on (default)
6) Tone Latch Setting (Ach): ON = Latch enabled (default), OFF = Latch disabled
7) Minimum volume setting (Bch): ON = Mute at min level (default), OFF = Not silent at min level
8) Not used
9) Call-on-talk setting (Bch): ON = Call occurs, OFF = No call when talk on (default)
10) Talk-on latch setting (Bch): ON = Latch enabled (default), OFF = Latch disabled