2ch belt pack station. The intercom line is a 6-pin specification, and dual listen and talk are possible. Equipped with DIP switches for setting output to the headset, toe clutch, on/off, etc., the functions can be customized according to the situation at the site.
[直輸入品][Direct Import]
■ 2ch specification belt pack, 6-pin connector
■ Simple and functional design
■ Belt clip can rotate 90 degrees
■ Some functions can be customized with DIP switches
[General]
・Operating voltage: 12V to 30V
・Operating temperature: 0° to 70°
・Current consumption: ~13mA (when all inputs are off)
・Dimensions (excluding protrusions): 114.3 (W) x 86.4 (H) x 43.2 (D) mm
・Weight: 0.31kg
[Mic preamplifier]
・Frequency characteristics: 280Hz to 15kHz ± 3dB
・Distortion rate: <0.1%
・S/N ratio:> 65db
[Headphone amplifier]
・Frequency characteristics: 150-20kHz ± 3dB
・Distortion rate: <0.5%
・S/N ratio:> 50dB
・Crosstalk:> 80dB
・Side tone signal:> 45dB (-80dB mic input)
[Connector]
・Intercom line: XLR 6-pin male x 1, XLR 6-pin female x 1
・Headset: XLR 4-pin male x 1
[DIP switch]
1) Microphone type selection: ON = Dynamic (default), OFF = Electret
2) Headset output: ON = High (default), OFF = Low
*The initial setting at the manufacturer is Low, but High is the initial setting for domestic shipments.
3) Minimum volume setting (Ach): ON = Mute at min level (default), OFF = Not silent at min level
4) LED settings: ON = LED normal operation (default), OFF = All LEDs dark
5) Call on talk setting (Ach): ON = Call occurs operation, OFF = No call when talk on (default)
6) Toe clutch setting (Ach): ON = Latch enabled (default), OFF = Latch disabled
7) Minimum volume setting (Bch): ON = Mute at min level (default), OFF = Not silent at min level
8) Not used
9) Call on talk setting (Bch): ON = Call occurs operation, OFF = No call when talk on (default)
10) Toe clutch setting (Bch): ON = Latch enabled (default), OFF = Latch di
関連商品
商品レビューProduct Review
すべてのレビューを見る