TOA / YW-560

This directional flat antenna for 800 MHz wireless systems features a built-in antenna element and can be mounted on walls or ceilings. By suppressing rear directivity, it reduces the effects of external noise. It allows for the creation of highly convenient systems, such as the use of the same channel between adjacent areas. It also has a built-in attenuator switch, bandpass filter, and booster circuit. It also features a power indicator LED.

Wireless antenna, 800 MHz, for wall and ceiling mounting

Specifications
Power supply: DC 7-12 V (supplied from amplifier or tuner)
Current consumption: 15 mA (at 9 V)
Reception frequency range: 806-810 MHz
Dipole ratio relative gain: Approximately +8 dB (including booster amplifier) ​​(*1)
Frequency feedback ratio: Approximately 15 dB
Attenuation: 0, -10, -20 dB (nominal)
VSWR: 3.0 or less
Output impedance: 75 Ω
Output terminal: Direct attachment of coaxial cable via mounting screws
Mounting hole pitch: 83.5 mm
Operating temperature range: -10°C - +50°C
Waterproof: IPX2
Finish: ASA resin, off-white (approximate Munsell 5Y8.8/1.2)
Dimensions: 208(W) x 208(H) x 42(D) mm
Weight: 720g
Accessories: Self-tapping screws for wood walls (nominal size 4x25)...4, Anti-fall belt mounting screw (nominal size 4x25)...1, Electrical box screws (M3.5x20)...2, Rubber shield...1, Cable ties...2
(*1) When the receiver ATT is 0dB
*Please use a low-loss cable such as 5C-FB or 7C-FB. *When installing outdoors, please install in a location that is protected from rain. Although the unit is waterproof (IPX2), please seal the gap between the unit and the wall and the switch knob with sealant. *This antenna is designed specifically for our wireless tuners (analog and digital).