SONIC / 579787

The SONIC / POT ADAPTOR RING is a pot adapter that comes in handy when the mounting threads on your pots are smaller than the mounting holes on your guitar/bass. Currently, guitar/bass pots come in three common diameters: 7mm, 8mm, and 3/8 inch (approximately 9.5mm). This set includes one adapter for each of the three sizes: 7mm pots to 8mm and 3/8 inch, and 8mm pots to 3/8 inch.

■ Pot Adapter Rings
■ Set of 3 types (1 of each)
・7mm → 8mm
・7mm-3/8 inch (approx. 9.5mm)
・8mm-3/8 inch (approx. 9.5mm)
■ Made of polypropylene

~From the manufacturer's website~
Pot adapter rings are used to fit full-up pots and other pots to guitars.
Currently, commercially available guitar pots come in three mounting diameter sizes: 7mm, 8mm, and 3/8 inch (approx. 9.5mm). Consequently, guitar mounting holes also come in these three sizes. If the mounting hole is smaller than the pot you're installing, you can simply enlarge it, but if the hole is larger, the pot won't fit snugly. Pot adapter rings are used in such cases to center the pot perfectly in the hole. To mount a 7mm pot in an 8mm hole, use PA-02. To mount a 7mm pot in a 3/8-inch hole, use PA-03. To mount an 8mm pot in a 3/8-inch hole, use PA-04. PA-01 comes in a set of one of each size.
~How to Use~
Normally, use it on top instead of a flat washer.
Use the one that matches the size of the space you'll be using it in.
・7mm = Japanese-made small pot
・8mm = Japanese-made large pot
・3/8-inch (approx. 9.5mm) = American-made pot

*Images are for illustrative purposes only.