audio technica / ATW-R920

audio-technicaお問い合わせ窓口

This 2-channel receiver uses a PLL synthesizer system and can be switched between A2 type 71 waves, A type 71 waves, and B type 30 waves.

- Uses a PLL synthesizer system. Switchable between A2 type 71 channels, A type 71 channels, and B type 30 channels.
- Diversity system ensures stable reception with minimal dropouts.
- DC12V output possible from the antenna input terminal. Provides power to external antennas and boosters (sold separately).
- Display backlight allows you to check reception status even in dark places.
- RF and AF meters are displayed with LEDs for excellent visibility.
- Headphone monitor selector switch allows simultaneous monitoring of each channel at the same level.
- Transmitter battery status and other status indicators can be monitored.
- Included connector kit allows for front-mounting of antennas.
- Compatible with previous models (ATW-T93/ATW-T94/ATW-T98).

■ Reception Method: Double Superheterodyne
■ Reception Frequency: 779.125-787.875 MHz / 797.125-805.875 MHz / 806.125-809.750 MHz
■ Reception Channels: 2 of 172 channels (A2 + A + B)
■ Reception Sensitivity: 20 dBμV (Signal-to-Noise Ratio 60dB, Frequency Deviation ±5kHz)
■ Total Distortion: Less than 1% (58dBμV input, 1kHz, Frequency Deviation ±10kHz)
■ Signal-to-Noise Ratio: More than 100dB (58dBμV input, 1kHz, Frequency Deviation ±40kHz)
■ Audio Output Level:
Balanced: -48dB (Frequency Deviation ±5kHz)
Unbalanced: -28dB (Frequency Deviation ±5kHz)
■ Antenna Input Terminal: BNC Type (50Ω) DC12V Output (Max. 100mA x 4)
■ Audio Output Terminal:
XLR 3-pin Male (Balanced)
φ6.3 Mono Jack (Unbalanced)
■ Headphone Output Terminal:
φ6.3 Stereo Jack, 50mW into 32Ω Load (Max. Modulation)
■ Power Supply: AC100V 50/60Hz
■ Operating temperature range: 5°C to 45°C
■ Power consumption: 15W
■ Accessories
- 1/2λ whip antenna x 2
- Power cord x 1
- Power relay cord x 1
- Feet x 4 (with 4 mounting screws)
- BNC-BNC connector x 2
- BNC-BNC cable (long x 1, short x 1)
- 3P-2P power plug x 1