SONIC / FT-06

SONIC's full-up tone pot eliminates signal loss when the tone is turned up to full 10. The FT-06 FULL-UP TONE SW-POT 500kΩ 3/8"" is a 500kΩ pot with a 3/8"" (approximately 9.5mm) mounting hole and a push-pull switch. When turned up to full 10, the circuit is bypassed, providing a completely clear, crisp, full-up sound.

■ Full-Up Tone Pot
■ Split Shaft (Imperial Standard)
■ Push-Pull Switch Function
■ 500kΩ
■ A-Curve
■ Mounting Hole 3/8"" (approx. 9.5mm)

~From the Manufacturer~
With volume and tone circuits using standard potentiometers, even at full volume, some signal passes through the pot's internal circuitry, resulting in loss and a loss in the guitar's sound.
However, with Sonic's ""Full-Up Volume Pot"" and ""Full-Up Tone Pot,"" the volume and tone circuits are completely bypassed at full volume, resulting in a completely clear, full-up sound. Of course, you can still control the volume and tone controls as usual when they are turned down.

- The Full-Up Volume and Full-Up Tone pots are designed specifically for volume and tone, respectively. Please note that they cannot be used for any other purpose.
- While the Full-Up Volume and Full-Up Tone pots can be used independently, we recommend using them together to maximize their performance.

*Images are for illustrative purposes only.
*When replacing guitar/bass parts, there may be slight differences in specifications, so we do not guarantee or check the fit. Please be aware that when replacing parts, modifications will be required.