Line 6 / TBP06

The TBP06 is a 6-channel transmitter designed for the Relay G30 digital guitar wireless system.

■Digital Wireless Transmitter

- Features like rugged construction, a slim design, and simple operation help the acclaimed Relay G30 provide guitarists and bassists with wired sound, rock-solid reliability, and simplified operation (only one transmitter per system channel).

Features
- Lightweight, slim, and easy to use
- 6 channels
- Durable polycarbonate shell
- 8 hours of battery life with two AA alkaline batteries (batteries sold separately)
- Two LEDs for easy power and signal status indication
- Channel selector on the front panel
- 24-bit A/D conversion, 128x oversampling, input impedance: 1.3 MΩ
- 1/4-inch unbalanced input
- Dimensions: 72mm W x 57mm H x 32mm D, Weight: Approx. 85g

■When replacing only the TBP06

If your TBP06 is not receiving signals after replacing it, you will need to configure the transmitter.
- Enter Setup mode to display the current channel.
- With the transmitter off, set the Channel Select slide switch to channel 6.
- Power on the transmitter and wait until the first LED flashes.
- Quickly slide the Channel Select switch to Channel 1 (far left).
- Quickly slide the Channel Select switch to Channel 6 (far right).
- Repeat this process three times (power on at 6 -> 1 -> 6 -> 1 -> 6 -> 1 -> 6).
- The blue LED will flash once, indicating the transmitter is in RF1 (quad-frequency transmission mode). To return to RF2 transmission mode, repeat the same steps. The blue LED will flash twice.